Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
FormulaMod
Supplies ATX 24-pin, CPU 8-pin and PCIe 8-pin power via 18 AWG white cables with pre-fitted combs at 300 mm length
Color White
Las versiones tachadas existen, pero no están disponibles aquí.
The FormulaMod Fm-NCK1 kit supplies pre-assembled cables that connect a power supply to the motherboard and graphics card inside a liquid-cooled chassis. White 18 AWG conductors run 300 mm from male 5557 to female 5559 connectors, and each cable includes two matching combs for alignment. The set covers ATX 24-pin, PCI-E 8-pin and CPU 8-pin paths in a single package.
Because the kit carries only electrical current, it adds no heat, noise or fan load to the cooling loop. The 18 AWG gauge is rated for the current delivered by standard desktop power supplies, so voltage drop across the 300 mm length remains negligible. No active components are present, leaving the thermal and acoustic profile entirely unchanged.
The fixed 300 mm length suits compact reservoirs and tight routing channels where stock cables would bunch or kink. Male-to-female 5557-to-5559 interfaces plug directly into existing PSU and component headers without adapters. Pre-fitted combs keep wires parallel, freeing space around water blocks and radiators for cleaner tubing runs.
| Series | N/A |
|---|---|
| Type | Accessories |
| Fan Size | No Fans |
| Color | White |
Align the 5557 male connector with the PSU port and the 5559 female connector with the component header, then press straight in until the latch clicks; the 18 AWG cores are stiff, so do not rock the plug sideways or the pins can bend.
The sleeving is colour-fast under normal case temperatures and the combs snap tightly onto the 3 mm diameter cables; they do not require scheduled replacement unless you physically break a comb during a rebuild.
The fixed 300 mm reach from PSU to component is the first constraint; if the grommet-to-header distance exceeds that, the cable will pull tight and you cannot extend it without ordering a custom length.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?