Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four black and silver brass G1/4 rotary fittings

FormulaMod

FormulaMod GD-X 4-Pack G1/4" Rotary Fittings Black/Silver

SKU CH-WQDY-RKWVV

Four rotary G1/4" brass fittings in black and silver for adjustable hard-tube liquid cooling loops

  • TypeWater Blocks
  • Fan SizeNo Fans
  • ColorBlack
  • Rotary G1/4" thread simplifies tube routing
  • Brass construction resists corrosion in coolant loops
  • Four-piece set covers multiple connection points
  • Adjustable angle eases tight-space installations
  • Black and silver finish matches themed builds

Four-piece rotary fitting set

The FormulaMod GD-X pack contains four G1/4-inch rotary connectors machined from brass with a black and silver finish. Each fitting rotates freely so hard-tube runs can be aligned without stress on the tubing or the block ports. The quarter-turn design suits custom open-loop builds that need clean, adjustable routing.

G1/4 thread limits

The G1/4 BSPP thread is the de facto standard for consumer water-cooling components, but it caps the maximum bore at roughly six millimetres. Flow restriction rises sharply if you try to push larger tubing through the same port, so the interface itself sets a hard ceiling on loop throughput.

Replaces fixed-angle adapters

Swapping static 45-degree or 90-degree elbows for these revolvable fittings eliminates the trial-and-error of buying multiple fixed angles. The upgrade pays off when tube runs must change direction in tight spaces or when you plan to reconfigure the loop later without cutting new tube lengths.

Privalumai

  • Rotary G1/4" thread simplifies tube routing
  • Brass construction resists corrosion in coolant loops
  • Four-piece set covers multiple connection points
  • Adjustable angle eases tight-space installations
  • Black and silver finish matches themed builds

Specifikacijos

SeriesN/A
TypeWater Blocks
Fan SizeNo Fans
ColorBlack

Klausimai apie šią prekę

What is the difference between the GD-X, GD-45 and GD-90 models?

The GD-X is a straight rotary connector, the GD-45 provides a 45-degree angle and the GD-90 provides a 90-degree angle for different routing needs.

How does the G1/4" thread perform once installed in a loop?

The G1/4" brass thread seals against standard water-cooling ports and the rotary body lets you orient the tube without stressing the fitting.

What does the G1/4" rotary standard allow in practice?

It fits every G1/4" port, accepts matching hard-tube adaptors and the revolving joint lets you align the run after tightening.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.