Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four black and silver brass G1/4 rotary fittings

FormulaMod

FormulaMod GD-X 4-Pack G1/4" Rotary Fittings Black/Silver

SKU CH-WQDY-RKWVV

Four rotary G1/4" brass fittings in black and silver for adjustable hard-tube liquid cooling loops

  • TypeWater Blocks
  • Fan SizeNo Fans
  • ColorBlack
  • Rotary G1/4" thread simplifies tube routing
  • Brass construction resists corrosion in coolant loops
  • Four-piece set covers multiple connection points
  • Adjustable angle eases tight-space installations
  • Black and silver finish matches themed builds

Four-piece rotary fitting set

The FormulaMod GD-X pack contains four G1/4-inch rotary connectors machined from brass with a black and silver finish. Each fitting rotates freely so hard-tube runs can be aligned without stress on the tubing or the block ports. The quarter-turn design suits custom open-loop builds that need clean, adjustable routing.

G1/4 thread limits

The G1/4 BSPP thread is the de facto standard for consumer water-cooling components, but it caps the maximum bore at roughly six millimetres. Flow restriction rises sharply if you try to push larger tubing through the same port, so the interface itself sets a hard ceiling on loop throughput.

Replaces fixed-angle adapters

Swapping static 45-degree or 90-degree elbows for these revolvable fittings eliminates the trial-and-error of buying multiple fixed angles. The upgrade pays off when tube runs must change direction in tight spaces or when you plan to reconfigure the loop later without cutting new tube lengths.

Kohokohdat

  • Rotary G1/4" thread simplifies tube routing
  • Brass construction resists corrosion in coolant loops
  • Four-piece set covers multiple connection points
  • Adjustable angle eases tight-space installations
  • Black and silver finish matches themed builds

Tekniset tiedot

SeriesN/A
TypeWater Blocks
Fan SizeNo Fans
ColorBlack

Kysymyksiä tästä tuotteesta

What is the difference between the GD-X, GD-45 and GD-90 models?

The GD-X is a straight rotary connector, the GD-45 provides a 45-degree angle and the GD-90 provides a 90-degree angle for different routing needs.

How does the G1/4" thread perform once installed in a loop?

The G1/4" brass thread seals against standard water-cooling ports and the rotary body lets you orient the tube without stressing the fitting.

What does the G1/4" rotary standard allow in practice?

It fits every G1/4" port, accepts matching hard-tube adaptors and the revolving joint lets you align the run after tightening.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.