Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
White 140mm ARGB case fan with seven swept blades and daisy-chain cable

Fractal Design

Fractal Design Dynamic 3 140mm ARGB White PWM Case Fan FD-F-DR3-1402

SKU CH-DQVZ-V6V0K MPN FD-F-DR3-1402

A 140mm PWM case fan delivering 76.3 CFM airflow at 30.8 dB(A) with ARGB Gen 2 lighting and daisy-chain cables

  • Strong airflow up to 76.3 CFM from 7-blade swept design
  • Quiet operation at 30.8 dB(A) even at higher speeds
  • PWM control across 350 to 1800 RPM for precise cooling balance
  • 8 ARGB Gen 2 LEDs enable customizable lighting effects
  • 90000-hour MTTF rifle bearing ensures long-term reliability

140mm ARGB PWM Case Fan

The Fractal Design Dynamic 3 140mm ARGB White PWM Case Fan FD-F-DR3-1402 is a 140mm cooling component built for PC builders who want adjustable airflow and addressable RGB lighting in a white finish. It suits systems that need a balance of air movement and visual customisation without requiring specialised mounting hardware.

Sustained-load behaviour

A high-grade Rifle bearing rated for 90000-hour MTTF supports continuous operation across the full 350 to 1800 RPM PWM range. The 7-blade swept design maintains up to 76.3 CFM airflow and 2.61 mm H2O static pressure at 30.8 dB(A), allowing the fan to handle prolonged thermal loads while keeping acoustic output consistent.

Interface practical limits

The fan connects via standard 4-pin PWM and ARGB headers, with integrated daisy-chain cables that let multiple units share a single motherboard connector. ARGB Gen 2 lighting uses eight LEDs for dynamic effects, but the number of fans per header is limited by the motherboard’s rated current for both PWM and 5 V ARGB circuits. Builders without enough headers or with lower current limits must plan power distribution accordingly.

Privalumai

  • Strong airflow up to 76.3 CFM from 7-blade swept design
  • Quiet operation at 30.8 dB(A) even at higher speeds
  • PWM control across 350 to 1800 RPM for precise cooling balance
  • 8 ARGB Gen 2 LEDs enable customizable lighting effects
  • 90000-hour MTTF rifle bearing ensures long-term reliability

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How loud is the 140mm fan at full 1800 RPM during all-day use?

The fan reaches 30.8 dB(A) at maximum speed, a level most people hear as a quiet whisper inside a closed case.

Which motherboard header or controller do I need to run the ARGB Gen 2 lighting and PWM control?

A standard 4-pin PWM header powers the motor and a 5 V 3-pin ARGB header drives the eight LEDs; both must be present on the board or a compatible hub.

Will the 76.3 CFM airflow and 2.61 mm H2O static pressure work with an older dense radiator or heatsink?

Yes, the swept 7-blade design delivers that pressure at up to 1800 RPM, so it can push air through restrictive fin stacks found on older coolers.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.