Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
White 140mm ARGB case fan with seven swept blades and daisy-chain cable

Fractal Design

Fractal Design Dynamic 3 140mm ARGB White PWM Case Fan FD-F-DR3-1402

SKU CH-DQVZ-V6V0K MPN FD-F-DR3-1402

A 140mm PWM case fan delivering 76.3 CFM airflow at 30.8 dB(A) with ARGB Gen 2 lighting and daisy-chain cables

  • Strong airflow up to 76.3 CFM from 7-blade swept design
  • Quiet operation at 30.8 dB(A) even at higher speeds
  • PWM control across 350 to 1800 RPM for precise cooling balance
  • 8 ARGB Gen 2 LEDs enable customizable lighting effects
  • 90000-hour MTTF rifle bearing ensures long-term reliability

140mm ARGB PWM Case Fan

The Fractal Design Dynamic 3 140mm ARGB White PWM Case Fan FD-F-DR3-1402 is a 140mm cooling component built for PC builders who want adjustable airflow and addressable RGB lighting in a white finish. It suits systems that need a balance of air movement and visual customisation without requiring specialised mounting hardware.

Sustained-load behaviour

A high-grade Rifle bearing rated for 90000-hour MTTF supports continuous operation across the full 350 to 1800 RPM PWM range. The 7-blade swept design maintains up to 76.3 CFM airflow and 2.61 mm H2O static pressure at 30.8 dB(A), allowing the fan to handle prolonged thermal loads while keeping acoustic output consistent.

Interface practical limits

The fan connects via standard 4-pin PWM and ARGB headers, with integrated daisy-chain cables that let multiple units share a single motherboard connector. ARGB Gen 2 lighting uses eight LEDs for dynamic effects, but the number of fans per header is limited by the motherboard’s rated current for both PWM and 5 V ARGB circuits. Builders without enough headers or with lower current limits must plan power distribution accordingly.

Přednosti

  • Strong airflow up to 76.3 CFM from 7-blade swept design
  • Quiet operation at 30.8 dB(A) even at higher speeds
  • PWM control across 350 to 1800 RPM for precise cooling balance
  • 8 ARGB Gen 2 LEDs enable customizable lighting effects
  • 90000-hour MTTF rifle bearing ensures long-term reliability

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

How loud is the 140mm fan at full 1800 RPM during all-day use?

The fan reaches 30.8 dB(A) at maximum speed, a level most people hear as a quiet whisper inside a closed case.

Which motherboard header or controller do I need to run the ARGB Gen 2 lighting and PWM control?

A standard 4-pin PWM header powers the motor and a 5 V 3-pin ARGB header drives the eight LEDs; both must be present on the board or a compatible hub.

Will the 76.3 CFM airflow and 2.61 mm H2O static pressure work with an older dense radiator or heatsink?

Yes, the swept 7-blade design delivers that pressure at up to 1800 RPM, so it can push air through restrictive fin stacks found on older coolers.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.