Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Grey rectangular thermal pad, 80 by 40 by 1.5mm, soft matte finish

GELID SOLUTIONS

GELID SOLUTIONS GP-Extreme 12W Thermal Pad 80x40x1.5mm

SKU CH-VRPF-8BM1Y

High-conductivity 12 W/mK thermal pad measuring 80×40×1.5 mm for filling gaps on PCBs, GPUs and consoles

Option 80 x 40 x 1.5mm

  • 12 W/mK thermal conductivity for efficient heat transfer
  • Non-electrically conductive pad prevents short circuits
  • Soft 1.5 mm thickness fills uneven PCB surfaces
  • 80 × 40 mm size fits large GPU and laptop boards
  • Non-corrosive and non-toxic material safe for components

GP-Extreme 12W thermal pad for PCBs

The GP-Extreme is a 12W/mK thermal pad sized at 80x40x1.5mm. It targets builders who need to bridge uneven surfaces on graphics cards, laptops or consoles. The material is non-electrically conductive, non-corrosive and non-toxic for safe handling.

Sustained conductivity across irregular gaps

Under continuous load the soft pad maintains full contact with microcontrollers, memory ICs and MOSFETs without hardening or curing. Its 12W/mK rating stays stable because the compound does not dry out or become brittle over time.

1.5mm thickness decides the fit

This specific 1.5mm pad only works where the stack-up gap matches that height. Buyers needing a thinner 0.5mm or 1.0mm layer or a thicker 2.0mm or 3.0mm layer must choose a different variant.

Privalumai

  • 12 W/mK thermal conductivity for efficient heat transfer
  • Non-electrically conductive pad prevents short circuits
  • Soft 1.5 mm thickness fills uneven PCB surfaces
  • 80 × 40 mm size fits large GPU and laptop boards
  • Non-corrosive and non-toxic material safe for components

Specifikacijos

BrandGELID Solutions

Kiti šio modelio variantai

Dar 4 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How much heat does the 12W/mK pad move when it runs all day?

The pad conducts heat at 12W/mK, so it continuously transfers thermal energy from the component to the heatsink without drying out or hardening.

What must I already have to install this 80×40mm pad?

You need a heatsink or metal surface that contacts the 80×40mm face and enough mounting pressure to keep the 1.5mm thickness compressed.

Will the 1.5mm thickness work with the original cooler on my older GPU?

The soft 1.5mm pad conforms to uneven surfaces and height differences on legacy boards, filling gaps the stock thermal material may leave.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.