我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Grey rectangular thermal pad, 80 by 40 by 1.5mm, soft matte finish

GELID SOLUTIONS

GELID SOLUTIONS GP-Extreme 12W Thermal Pad 80x40x1.5mm

SKU CH-VRPF-8BM1Y

High-conductivity 12 W/mK thermal pad measuring 80×40×1.5 mm for filling gaps on PCBs, GPUs and consoles

Option 80 x 40 x 1.5mm

  • 12 W/mK thermal conductivity for efficient heat transfer
  • Non-electrically conductive pad prevents short circuits
  • Soft 1.5 mm thickness fills uneven PCB surfaces
  • 80 × 40 mm size fits large GPU and laptop boards
  • Non-corrosive and non-toxic material safe for components

GP-Extreme 12W thermal pad for PCBs

The GP-Extreme is a 12W/mK thermal pad sized at 80x40x1.5mm. It targets builders who need to bridge uneven surfaces on graphics cards, laptops or consoles. The material is non-electrically conductive, non-corrosive and non-toxic for safe handling.

Sustained conductivity across irregular gaps

Under continuous load the soft pad maintains full contact with microcontrollers, memory ICs and MOSFETs without hardening or curing. Its 12W/mK rating stays stable because the compound does not dry out or become brittle over time.

1.5mm thickness decides the fit

This specific 1.5mm pad only works where the stack-up gap matches that height. Buyers needing a thinner 0.5mm or 1.0mm layer or a thicker 2.0mm or 3.0mm layer must choose a different variant.

商品特色

  • 12 W/mK thermal conductivity for efficient heat transfer
  • Non-electrically conductive pad prevents short circuits
  • Soft 1.5 mm thickness fills uneven PCB surfaces
  • 80 × 40 mm size fits large GPU and laptop boards
  • Non-corrosive and non-toxic material safe for components

商品規格

BrandGELID Solutions

其他版本

同系列還有 4 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much heat does the 12W/mK pad move when it runs all day?

The pad conducts heat at 12W/mK, so it continuously transfers thermal energy from the component to the heatsink without drying out or hardening.

What must I already have to install this 80×40mm pad?

You need a heatsink or metal surface that contacts the 80×40mm face and enough mounting pressure to keep the 1.5mm thickness compressed.

Will the 1.5mm thickness work with the original cooler on my older GPU?

The soft 1.5mm pad conforms to uneven surfaces and height differences on legacy boards, filling gaps the stock thermal material may leave.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。