我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Grey thermal pad sheet 80 by 40 by 0.5 mm

GELID SOLUTIONS

GELID SOLUTIONS GP-Extreme 12W Thermal Pad 80x40x0.5mm

SKU CH-J7YM-EG3C6

High-conductivity 12 W/mK thermal pad measuring 80×40×0.5 mm for memory ICs, MOSFETs and other SMD components

Option 80 x 40 x 0.5 mm

  • 12 W/mK thermal conductivity transfers heat efficiently from memory and chipset components
  • 5 mm thickness conforms to uneven PCB surfaces for reliable contact
  • Non-electrically conductive material prevents short circuits on dense boards
  • 80 × 40 mm sheet covers large VGA card or laptop heatsink areas
  • Soft, non-curing pad installs easily without hardening over time

Thermal pad for uneven PCB surfaces

The GELID SOLUTIONS GP-Extreme is a 12 W/mK thermal pad measuring 80 by 40 by 0.5 mm. It targets builders who need reliable heat transfer between a heatsink and components that sit at different heights on a circuit board. The material is non-electrically conductive, non-corrosive, non-curing and non-toxic. It suits graphics cards, laptops, consoles and dense SMD layouts.

Softness and pre-cut dimensions simplify

The pad’s softness lets it conform to surface irregularities without excessive pressure, filling gaps that firmer pads would leave. Its 80 by 40 mm footprint matches larger PCB areas so users can apply a single piece instead of cutting smaller strips. No adhesive or curing time is required; the pad stays pliable and can be repositioned during assembly.

0.5 mm thickness decides fit for tight clearances

This variant is 0.5 mm thick; the same series also exists in 1.0, 1.5, 2.0 and 3.0 mm options. Choose this thickness only when the component-to-heatsink gap measures close to half a millimetre. Buyers needing to bridge larger gaps should select a thicker pad from the same range.

商品特色

  • 12 W/mK thermal conductivity transfers heat efficiently from memory and chipset components
  • 5 mm thickness conforms to uneven PCB surfaces for reliable contact
  • Non-electrically conductive material prevents short circuits on dense boards
  • 80 × 40 mm sheet covers large VGA card or laptop heatsink areas
  • Soft, non-curing pad installs easily without hardening over time

商品規格

BrandGELID Solutions

其他版本

同系列還有 4 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

When will the 0.5 mm GP-Extreme pad need replacing?

The pad is non-hardening and non-curing, so it does not degrade on a fixed schedule. Replace only if the cooler is removed or the pad is physically damaged.

What limits heat transfer during long sessions with this 12 W/mK pad?

The 12 W/mK conductivity and 0.5 mm thickness set the steady-state thermal resistance; the pad itself does not saturate or throttle.

Does the GP-Extreme pad generate noise or extra heat when used continuously?

It is a passive silicone pad with no moving parts, so it produces zero noise and adds no heat beyond conducting it from the component to the heatsink.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。