Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

Group Other

Group Other Antminer S19 95TH/s 3250W mining hardware

SKU CH-PDPQ-CSYVR

Bitcoin ASIC miner delivering 95 TH/s at 3250 W with 34.5 J/TH efficiency and integrated APW12 power supply

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a Bitcoin ASIC miner rated at 95 TH/s hash rate with 3250 W power draw. It includes an APW12 power supply and ships new in a single integrated chassis measuring 400 mm by 195 mm by 290 mm. Firmware updates improve start-up speed and operational stability.

Suited for 220 V industrial sites

This unit requires a 220 V supply and draws 3250 W continuously, so it suits facilities with adequate high-voltage capacity and cooling. Buyers without access to 220 V infrastructure or those who cannot sustain the power load should consider other options. The supplier applies a 40 % restock fee within 30 days, making impulse purchases risky.

Efficiency 34.5 J/TH ±10 %

Power efficiency is specified as 34.5 J/TH with a tolerance of ±10 %, and the custom Bitmain chips target an energy ratio as low as 23 J/TH. This figure determines whether the hardware meets your cost-per-hash target.

Privalumai

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Will the 95TH/s hash rate and 3250W draw run alongside my older Antminer S17 on the same 220V circuit?

Both miners need 220V input; combined load must stay within your circuit rating. The S19 draws 3250W, so check total amperage before sharing a circuit.

How do I confirm the unit is hashing at the rated 95TH/s after first boot?

The new interface shows real-time hash rate, average hash rate and fluctuations; expect 95TH/s ±3% once firmware stabilises.

Does the box include the APW12 power supply and all cables, or must I buy a 220V PDU separately?

Supplier title states the S19 includes PSU; a 220V PDU or suitable outlet is not in the box and must be sourced separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.