Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver metal chassis with front fan grille and rear power sockets, 400 by 195 by 290 mm

Group Other

Group Other Antminer S19 95TH/s 3250W mining hardware

SKU CH-PDPQ-CSYVR

Bitcoin ASIC miner delivering 95 TH/s at 3250 W with 34.5 J/TH efficiency and integrated APW12 power supply

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

Bitcoin ASIC Miner 95 TH/s

The Bitmain Antminer S19 is a Bitcoin ASIC miner rated at 95 TH/s hash rate with 3250 W power draw. It includes an APW12 power supply and ships new in a single integrated chassis measuring 400 mm by 195 mm by 290 mm. Firmware updates improve start-up speed and operational stability.

Suited for 220 V industrial sites

This unit requires a 220 V supply and draws 3250 W continuously, so it suits facilities with adequate high-voltage capacity and cooling. Buyers without access to 220 V infrastructure or those who cannot sustain the power load should consider other options. The supplier applies a 40 % restock fee within 30 days, making impulse purchases risky.

Efficiency 34.5 J/TH ±10 %

Power efficiency is specified as 34.5 J/TH with a tolerance of ±10 %, and the custom Bitmain chips target an energy ratio as low as 23 J/TH. This figure determines whether the hardware meets your cost-per-hash target.

Kohokohdat

  • Delivers 95 TH/s hash rate for Bitcoin mining
  • Consumes 3250 W at the wall for high-density deployments
  • Achieves 34.5 J/TH efficiency with Bitmain custom chips
  • Integrated 220 V APW12 power supply simplifies rack installation
  • Compact 400 × 195 × 290 mm chassis fits standard mine shelving

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Will the 95TH/s hash rate and 3250W draw run alongside my older Antminer S17 on the same 220V circuit?

Both miners need 220V input; combined load must stay within your circuit rating. The S19 draws 3250W, so check total amperage before sharing a circuit.

How do I confirm the unit is hashing at the rated 95TH/s after first boot?

The new interface shows real-time hash rate, average hash rate and fluctuations; expect 95TH/s ±3% once firmware stabilises.

Does the box include the APW12 power supply and all cables, or must I buy a 220V PDU separately?

Supplier title states the S19 includes PSU; a 220V PDU or suitable outlet is not in the box and must be sourced separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.