Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black adapter with 29-pin SAS plug and 22-pin SATA socket, screw holes visible

HANNORD

HANNORD SAS to SATA Adapter SFF-8482 29Pin to 22Pin Converter

SKU CH-W31Y-WVY1G

Converts a 29-pin SAS SFF-8482 drive to a 22-pin SATA interface, supporting 2.5 and 3.5 inch drives with 6Gbps data and 12v+5v power

  • Changer TypeSATA

Model 1 Pack

  • Converts SFF-8482 29-pin SAS drives to standard 22-pin SATA ports
  • Supports 6 Gbps data plus 12 V and 5 V power delivery
  • Works with both 2.5-inch and 3.5-inch SATA drives
  • Male 22-pin to female 22-pin layout extends existing cables
  • Includes screw holes for secure chassis mounting

SAS-to-SATA Drive Adapter

This HANNORD adapter converts a 29-pin SFF-8482 SAS drive connector to a standard 22-pin SATA interface. It passes both 12 V and 5 V power lines together with 6 Gbps data. The assembly includes screw holes for secure mounting inside a chassis.

Upgrade from direct SAS backplane

Use this converter when a motherboard or controller offers only SATA ports but the drive on hand uses the SAS SFF-8482 plug. The jump is worth it if you want to reuse existing SAS drives without buying a dedicated SAS HBA or backplane.

Check drive connector and cable reach

Verify the drive presents a 29-pin SFF-8482 edge connector and that the 22-pin SATA male end can reach your motherboard or controller port. The adapter fits both 2.5 and 3.5 inch SATA drives but does not convert SAS signalling to SATA protocol.

Privalumai

  • Converts SFF-8482 29-pin SAS drives to standard 22-pin SATA ports
  • Supports 6 Gbps data plus 12 V and 5 V power delivery
  • Works with both 2.5-inch and 3.5-inch SATA drives
  • Male 22-pin to female 22-pin layout extends existing cables
  • Includes screw holes for secure chassis mounting

Specifikacijos

Changer TypeSATA

Kiti šio modelio variantai

Dar 1 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does the 29-pin SFF-8482 plug fit both 2.5 and 3.5-inch drive bays?

The adapter works with 2.5 and 3.5-inch SATA disks; the 29-pin SFF-8482 end connects to the drive and the 22-pin end plugs into the motherboard.

How do I install the adapter and which step is often missed?

Connect the 29-pin SFF-8482 male end to the SAS drive, then plug the 22-pin 7+15 male end into the motherboard SATA port; the step often missed is securing the bracket with the screw holes.

Will the 12V and 5V power lines need any maintenance later?

No maintenance is required for the power lines; the adapter simply passes 12V and 5V through the 22-pin connectors, so replacement is only needed if the unit is physically damaged.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.