Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Small black adapter with 29-pin SAS plug and 22-pin SATA socket, screw holes visible

HANNORD

HANNORD SAS to SATA Adapter SFF-8482 29Pin to 22Pin Converter

SKU CH-W31Y-WVY1G

Converts a 29-pin SAS SFF-8482 drive to a 22-pin SATA interface, supporting 2.5 and 3.5 inch drives with 6Gbps data and 12v+5v power

  • Changer TypeSATA

Model 1 Pack

  • Converts SFF-8482 29-pin SAS drives to standard 22-pin SATA ports
  • Supports 6 Gbps data plus 12 V and 5 V power delivery
  • Works with both 2.5-inch and 3.5-inch SATA drives
  • Male 22-pin to female 22-pin layout extends existing cables
  • Includes screw holes for secure chassis mounting

SAS-to-SATA Drive Adapter

This HANNORD adapter converts a 29-pin SFF-8482 SAS drive connector to a standard 22-pin SATA interface. It passes both 12 V and 5 V power lines together with 6 Gbps data. The assembly includes screw holes for secure mounting inside a chassis.

Upgrade from direct SAS backplane

Use this converter when a motherboard or controller offers only SATA ports but the drive on hand uses the SAS SFF-8482 plug. The jump is worth it if you want to reuse existing SAS drives without buying a dedicated SAS HBA or backplane.

Check drive connector and cable reach

Verify the drive presents a 29-pin SFF-8482 edge connector and that the 22-pin SATA male end can reach your motherboard or controller port. The adapter fits both 2.5 and 3.5 inch SATA drives but does not convert SAS signalling to SATA protocol.

Öne çıkanlar

  • Converts SFF-8482 29-pin SAS drives to standard 22-pin SATA ports
  • Supports 6 Gbps data plus 12 V and 5 V power delivery
  • Works with both 2.5-inch and 3.5-inch SATA drives
  • Male 22-pin to female 22-pin layout extends existing cables
  • Includes screw holes for secure chassis mounting

Teknik özellikler

Changer TypeSATA

Bu modelin diğer sürümleri

Aynı seriden 1 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does the 29-pin SFF-8482 plug fit both 2.5 and 3.5-inch drive bays?

The adapter works with 2.5 and 3.5-inch SATA disks; the 29-pin SFF-8482 end connects to the drive and the 22-pin end plugs into the motherboard.

How do I install the adapter and which step is often missed?

Connect the 29-pin SFF-8482 male end to the SAS drive, then plug the 22-pin 7+15 male end into the motherboard SATA port; the step often missed is securing the bracket with the screw holes.

Will the 12V and 5V power lines need any maintenance later?

No maintenance is required for the power lines; the adapter simply passes 12V and 5V through the 22-pin connectors, so replacement is only needed if the unit is physically damaged.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.