Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Bare 2.5 inch SATA SSD with silver metal casing

HPE

HP 868930-001 1.92TB SATA 2.5" internal SSD

SKU CH-0NXC-4096C

A 1.92TB 2.5-inch SATA solid-state drive for read-intensive server workloads

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 92TB capacity stores large datasets
  • SATA 6.0Gb/s interface enables fast data transfer
  • 5-inch form factor fits standard drive bays
  • Read-intensive design suits mixed-use workloads
  • Digitally signed firmware protects data integrity

HP 1.92TB SATA 2.5" internal SSD

This HP 868930-001 solid-state drive provides 1.92TB of storage over a SATA 6.0Gb/s interface in a 2.5-inch form factor. It is built for read-intensive workloads inside HPE ProLiant Gen9 and Gen10 servers. The drive uses MLC NAND and includes digitally signed firmware for supply-chain integrity. Hot-plug capability allows insertion or removal without powering down the chassis.

Suited for read-heavy server workloads

The drive targets administrators who need high-capacity, read-optimised storage for boot, logging or caching tasks in compatible HPE servers. Buyers who require write-intensive endurance for databases or mixed OLTP workloads should evaluate drives rated for higher drive writes per day. Systems lacking a SATA 6.0Gb/s backplane or the specific ProLiant Gen9 and Gen10 drive carriers cannot use this module.

SATA 6.0Gb/s interface and 2.5-inch SFF

The single specification that decides fitment is the SATA 6.0Gb/s interface combined with the 2.5-inch small form factor and the HPE-specific hot-plug carrier. Only servers that accept this exact physical and electrical interface — specifically HPE ProLiant Gen9 and Gen10 models — will recognise and operate the drive correctly.

Privalumai

  • 92TB capacity stores large datasets
  • SATA 6.0Gb/s interface enables fast data transfer
  • 5-inch form factor fits standard drive bays
  • Read-intensive design suits mixed-use workloads
  • Digitally signed firmware protects data integrity

Specifikacijos

BrandHP
Model868930-001
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Average Latency6Gb/s
Form Factor2.5"

Klausimai apie šią prekę

Will the 868930-001 work with my older SATA 3.0Gb/s backplane?

The drive uses the SATA 6.0Gb/s interface and is backward compatible with 3.0Gb/s controllers, so it will operate at the lower speed on older backplanes.

How can I verify the 1.92TB drive is healthy after installation?

Check the drive status in the ProLiant Smart Storage Administrator or the server BIOS; both report SMART data and firmware version for this model.

The listing says bare drive — what exactly ships and what must I supply?

You receive the 2.5 inch SSD only; a drive carrier, mounting screws and SATA cables are not included and must be sourced separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.