HPE
HP 868930-001 1.92TB SATA 2.5" internal SSD
A 1.92TB 2.5-inch SATA solid-state drive for read-intensive server workloads
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Average Latency6Gb/s
- Form Factor2.5"
- 92TB capacity stores large datasets
- SATA 6.0Gb/s interface enables fast data transfer
- 5-inch form factor fits standard drive bays
- Read-intensive design suits mixed-use workloads
- Digitally signed firmware protects data integrity
HP 1.92TB SATA 2.5" internal SSD
This HP 868930-001 solid-state drive provides 1.92TB of storage over a SATA 6.0Gb/s interface in a 2.5-inch form factor. It is built for read-intensive workloads inside HPE ProLiant Gen9 and Gen10 servers. The drive uses MLC NAND and includes digitally signed firmware for supply-chain integrity. Hot-plug capability allows insertion or removal without powering down the chassis.
Suited for read-heavy server workloads
The drive targets administrators who need high-capacity, read-optimised storage for boot, logging or caching tasks in compatible HPE servers. Buyers who require write-intensive endurance for databases or mixed OLTP workloads should evaluate drives rated for higher drive writes per day. Systems lacking a SATA 6.0Gb/s backplane or the specific ProLiant Gen9 and Gen10 drive carriers cannot use this module.
SATA 6.0Gb/s interface and 2.5-inch SFF
The single specification that decides fitment is the SATA 6.0Gb/s interface combined with the 2.5-inch small form factor and the HPE-specific hot-plug carrier. Only servers that accept this exact physical and electrical interface — specifically HPE ProLiant Gen9 and Gen10 models — will recognise and operate the drive correctly.
Kohokohdat
- 92TB capacity stores large datasets
- SATA 6.0Gb/s interface enables fast data transfer
- 5-inch form factor fits standard drive bays
- Read-intensive design suits mixed-use workloads
- Digitally signed firmware protects data integrity
Tekniset tiedot
| Brand | HP |
|---|---|
| Model | 868930-001 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Kysymyksiä tästä tuotteesta
Will the 868930-001 work with my older SATA 3.0Gb/s backplane?
The drive uses the SATA 6.0Gb/s interface and is backward compatible with 3.0Gb/s controllers, so it will operate at the lower speed on older backplanes.
How can I verify the 1.92TB drive is healthy after installation?
Check the drive status in the ProLiant Smart Storage Administrator or the server BIOS; both report SMART data and firmware version for this model.
The listing says bare drive — what exactly ships and what must I supply?
You receive the 2.5 inch SSD only; a drive carrier, mounting screws and SATA cables are not included and must be sourced separately.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
