Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small 2.5 inch HPE SAS drive in a smart carrier caddy

HPE

HPE 872737-001 1.2TB SAS 10000 RPM 12G 2.5" Smart Carrier internal hard drive

SKU CH-CCSM-QGBV5

1.2 TB SAS drive spins at 10 000 RPM with a 12 Gb/s interface and hot-swap carrier for HPE Gen10 servers

  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • FeaturesHot Swap
  • Form Factor2.5 Inches SFF
  • 2 TB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS 12Gb/s interface delivers high throughput
  • 5 inch SFF form factor fits dense server bays
  • Hot-swap carrier enables drive replacement without downtime

HPE 1.2TB SAS 10K 2.5" Smart Carrier

This HPE 872737-001 is a 1.2TB internal hard drive with a 2.5-inch small form factor and a 10000 RPM spindle speed. It connects through a SAS 12Gb/s interface and includes a Smart Carrier for hot-swap installation. The drive is built for HPE ProLiant Gen10 servers such as the DL360 and DL380 in SFF configurations.

Suited for hot-swap server bays needing 10K

It fits 2.5-inch hot-swap bays in supported HPE servers including the DL360 Gen10 8SFF, DL380 Gen10 24SFF and Apollo 4200. The 12Gb/s SAS link and 10000 RPM speed serve transactional workloads that demand low latency. Builders using 3.5-inch large form factor chassis or systems without a SAS backplane cannot install this drive.

The SAS 12Gb/s interface

The drive requires a SAS 12.0 Gbps backplane and a 2.5-inch hot-swap bay with Smart Carrier support. Compatibility is confirmed for specific Gen10 CTO servers such as the DL160 Gen10 8SFF and BL460c Gen10 blades. Without the matching SAS connector and carrier latch the drive will not seat or communicate.

Privalumai

  • 2 TB capacity stores large datasets
  • 10000 RPM spindle speed accelerates data access
  • SAS 12Gb/s interface delivers high throughput
  • 5 inch SFF form factor fits dense server bays
  • Hot-swap carrier enables drive replacement without downtime

Specifikacijos

BrandHP
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
FeaturesHot Swap
Form Factor2.5 Inches SFF

Klausimai apie šią prekę

Will the 2.5" Smart Carrier fit a DL360 Gen10 8SFF bay?

The 2.5" Smart Carrier is designed for SFF bays in HPE servers including the DL360 Gen10 8SFF CTO Server and DL380 Gen10 24SFF CTO Server.

How do I install the drive without losing the hot-swap function?

Slide the Smart Carrier into an empty SFF bay until the latch clicks; the SAS 12Gb/s interface connects automatically through the backplane.

When should I replace the 1.2TB 10000 RPM drive in a RAID array?

Replace the drive if SMART reports reallocated sectors, the controller flags a predictive failure, or the array enters a degraded state.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.