Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 2.5-inch SATA solid state drive 1.92 TB

HPE

HPE 877788-B21 1.92 TB 2.5" SATA internal solid state drive

SKU CH-TA5N-PVWFN

1.92 TB 2.5-inch SATA internal SSD with 600 MB/s interface for HPE ProLiant XL170r Gen10 server

  • 92 TB capacity stores large datasets
  • SATA 600 interface delivers 6 Gbit/s throughput
  • 5 inch form factor fits standard drive bays
  • Designed for HPE ProLiant XL170r Gen10 servers
  • New condition ensures full manufacturer reliability

HPE 1.92 TB SATA 2.5" server SSD

This HPE solid-state drive delivers 1.92 TB of storage in a 2.5-inch internal form factor. It connects via a SATA interface operating at the SATA/600 standard. The drive is designed for server environments and carries the manufacturer part number 877788-B21.

Suits HPE ProLiant XL170r Gen10 server upgrades

This drive is validated for the HPE ProLiant XL170r Gen10 server, making it a direct fit for that platform. It is not suitable for desktop PCs or laptops that require consumer-grade firmware. Buyers needing wireless connectivity should look elsewhere as this drive has no wireless LAN capability.

SATA/600 interface determines host compatibility

The drive uses the SATA/600 interface standard, so the host system must provide a matching SATA port. This single specification decides whether the drive can be installed and used. Verify that your server backplane or controller supports this interface before purchase.

Privalumai

  • 92 TB capacity stores large datasets
  • SATA 600 interface delivers 6 Gbit/s throughput
  • 5 inch form factor fits standard drive bays
  • Designed for HPE ProLiant XL170r Gen10 servers
  • New condition ensures full manufacturer reliability

Specifikacijos

BrandHPE

Klausimai apie šią prekę

Does my server need a 2.5" SATA drive bay to install this drive?

Yes, the drive uses a 2.5" form factor and connects through a SATA/600 interface, so a compatible 2.5" SATA bay is required.

Will this 1.92 TB SATA SSD work in an HPE ProLiant XL170r Gen10 server alongside existing mechanical drives?

It is listed as compatible with the HPE ProLiant XL170r Gen10 and uses the standard SATA/600 interface, allowing it to operate alongside other SATA drives in that server.

How can I verify the drive is recognised at full 1.92 TB capacity after installation?

Check the server BIOS or operating system disk management to confirm the drive appears with its full 1.92 TB capacity and reports a SATA/600 link speed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.