Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Metal server riser cage for HPE DL380 Gen10, silver finish, no retainer clip

HPE

HPE DL380 Gen10 PCI Primary/Secondary Riser Cage P38515B21

SKU CH-Q6DN-GVZTR MPN P38515B21

Adds PCI expansion slots to an HPE DL380 Gen10 server, weighing approximately 13.76 oz

  • Enables PCI expansion for HPE DL380 Gen10 servers
  • Primary and secondary riser configuration supported
  • Lightweight construction at 13.76 oz for easy installation
  • Genuine HPE part P38515B21 ensures compatibility
  • Supports server system upgrade requirements

Riser cage for DL380 Gen10

The HPE P38515B21 riser cage installs in a DL380 Gen10 server to provide PCI expansion slots for primary or secondary positions. It is a structural component that aligns add-in cards with the system board and chassis airflow. Weight is approximately 13.76 ounces. No retainer clip is included with this unit.

For DL380 Gen10 PCI expansion

This part suits administrators adding or replacing a riser in a supported DL380 Gen10 chassis. It does not suit other server models or generations. Buyers needing a retainer clip must source that piece separately. The cage alone does not add connectivity without compatible PCI cards.

DL380 Gen10 compatibility only

The decisive specification is confirmed compatibility with the HPE DL380 Gen10 server. Verify the server model and riser position before purchase. Other HPE systems use different riser cages that will not fit.

Privalumai

  • Enables PCI expansion for HPE DL380 Gen10 servers
  • Primary and secondary riser configuration supported
  • Lightweight construction at 13.76 oz for easy installation
  • Genuine HPE part P38515B21 ensures compatibility
  • Supports server system upgrade requirements

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I install the P38515B21 riser cage in the HPE DL380 Gen10 server and what step is often missed?

Align the riser cage with the motherboard connector and press firmly until seated; the separate retainer clip must then be fitted to lock it in place.

What maintenance or replacement will the riser cage need over time?

The cage itself has no moving parts; only the add-in cards installed into its slots may require future replacement or firmware updates.

What physical limit appears first when the riser cage runs under sustained load?

The cage is a passive metal bracket; thermal limits depend entirely on the installed cards and the server's own cooling capacity.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.