Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Metal server riser cage for HPE DL380 Gen10, silver finish, no retainer clip

HPE

HPE DL380 Gen10 PCI Primary/Secondary Riser Cage P38515B21

SKU CH-Q6DN-GVZTR MPN P38515B21

Adds PCI expansion slots to an HPE DL380 Gen10 server, weighing approximately 13.76 oz

  • Enables PCI expansion for HPE DL380 Gen10 servers
  • Primary and secondary riser configuration supported
  • Lightweight construction at 13.76 oz for easy installation
  • Genuine HPE part P38515B21 ensures compatibility
  • Supports server system upgrade requirements

Riser cage for DL380 Gen10

The HPE P38515B21 riser cage installs in a DL380 Gen10 server to provide PCI expansion slots for primary or secondary positions. It is a structural component that aligns add-in cards with the system board and chassis airflow. Weight is approximately 13.76 ounces. No retainer clip is included with this unit.

For DL380 Gen10 PCI expansion

This part suits administrators adding or replacing a riser in a supported DL380 Gen10 chassis. It does not suit other server models or generations. Buyers needing a retainer clip must source that piece separately. The cage alone does not add connectivity without compatible PCI cards.

DL380 Gen10 compatibility only

The decisive specification is confirmed compatibility with the HPE DL380 Gen10 server. Verify the server model and riser position before purchase. Other HPE systems use different riser cages that will not fit.

Priekšrocības

  • Enables PCI expansion for HPE DL380 Gen10 servers
  • Primary and secondary riser configuration supported
  • Lightweight construction at 13.76 oz for easy installation
  • Genuine HPE part P38515B21 ensures compatibility
  • Supports server system upgrade requirements

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I install the P38515B21 riser cage in the HPE DL380 Gen10 server and what step is often missed?

Align the riser cage with the motherboard connector and press firmly until seated; the separate retainer clip must then be fitted to lock it in place.

What maintenance or replacement will the riser cage need over time?

The cage itself has no moving parts; only the add-in cards installed into its slots may require future replacement or firmware updates.

What physical limit appears first when the riser cage runs under sustained load?

The cage is a passive metal bracket; thermal limits depend entirely on the installed cards and the server's own cooling capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.