Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
HPE riser kit for ProLiant DL380 Gen11 2U server, metal bracket with expansion slots

HPE

HPE P48802B21 Riser Kit for ProLiant DL380 Gen11 2U

SKU CH-7585-2Y1V5 MPN P48802B21

Adds three PCIe expansion slots to the ProLiant DL380 Gen11 2U server chassis

  • Designed for ProLiant DL380 Gen11 2U servers
  • Supports X8/X16/X8 slot configurations
  • Compact 15.5 in x 4.4 in x 10.4 in form factor
  • Lightweight at 2.23 lbs for easy installation
  • Genuine HPE part number P48802B21 ensures compatibility

Compatibility and form factor

This riser kit is designed for the HPE ProLiant DL380 Gen11 2U server and follows an X8/X16/X8 slot arrangement. It enables the installation of additional PCIe expansion cards in the supported chassis. The unit ships new and weighs approximately 2.23 lbs. Dimensions are 15.5 in wide by 4.4 in deep by 10.4 in high.

Who should use this and who should not

It suits administrators expanding I/O capacity on a DL380 Gen11 2U platform that requires the specific X8/X16/X8 riser configuration. Builders working with different server models, other chassis form factors, or alternative slot layouts cannot use this kit.

Deciding specification

The defining specification is the X8/X16/X8 PCIe slot configuration matched to the HPE ProLiant DL380 Gen11 2U chassis. Only systems that list this exact riser compatibility will accept the part.

Privalumai

  • Designed for ProLiant DL380 Gen11 2U servers
  • Supports X8/X16/X8 slot configurations
  • Compact 15.5 in x 4.4 in x 10.4 in form factor
  • Lightweight at 2.23 lbs for easy installation
  • Genuine HPE part number P48802B21 ensures compatibility

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Will the riser kit's PCIe slots need replacement after extended use?

The riser kit is a passive board with no moving parts, so no slot replacement is expected under normal server operation.

What physical limit appears first when the DL380 Gen11 runs sustained workloads with this riser installed?

The 15.5 in x 4.4 in x 10.4 in dimensions fix the card length and height envelope; longer or taller add-in cards simply will not fit.

Does the riser kit add audible noise or extra heat when the server runs all day?

The kit itself has no fans and draws no power, so it adds no noise or heat beyond the cards you plug into it.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.