暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
HPE riser kit for ProLiant DL380 Gen11 2U server, metal bracket with expansion slots

HPE

HPE P48802B21 Riser Kit for ProLiant DL380 Gen11 2U

SKU CH-7585-2Y1V5 MPN P48802B21

Adds three PCIe expansion slots to the ProLiant DL380 Gen11 2U server chassis

  • Designed for ProLiant DL380 Gen11 2U servers
  • Supports X8/X16/X8 slot configurations
  • Compact 15.5 in x 4.4 in x 10.4 in form factor
  • Lightweight at 2.23 lbs for easy installation
  • Genuine HPE part number P48802B21 ensures compatibility

Compatibility and form factor

This riser kit is designed for the HPE ProLiant DL380 Gen11 2U server and follows an X8/X16/X8 slot arrangement. It enables the installation of additional PCIe expansion cards in the supported chassis. The unit ships new and weighs approximately 2.23 lbs. Dimensions are 15.5 in wide by 4.4 in deep by 10.4 in high.

Who should use this and who should not

It suits administrators expanding I/O capacity on a DL380 Gen11 2U platform that requires the specific X8/X16/X8 riser configuration. Builders working with different server models, other chassis form factors, or alternative slot layouts cannot use this kit.

Deciding specification

The defining specification is the X8/X16/X8 PCIe slot configuration matched to the HPE ProLiant DL380 Gen11 2U chassis. Only systems that list this exact riser compatibility will accept the part.

特長

  • Designed for ProLiant DL380 Gen11 2U servers
  • Supports X8/X16/X8 slot configurations
  • Compact 15.5 in x 4.4 in x 10.4 in form factor
  • Lightweight at 2.23 lbs for easy installation
  • Genuine HPE part number P48802B21 ensures compatibility

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the riser kit's PCIe slots need replacement after extended use?

The riser kit is a passive board with no moving parts, so no slot replacement is expected under normal server operation.

What physical limit appears first when the DL380 Gen11 runs sustained workloads with this riser installed?

The 15.5 in x 4.4 in x 10.4 in dimensions fix the card length and height envelope; longer or taller add-in cards simply will not fit.

Does the riser kit add audible noise or extra heat when the server runs all day?

The kit itself has no fans and draws no power, so it adds no noise or heat beyond the cards you plug into it.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。