Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact tower server with matte silver finish and front drive bays

HPE

HPE ProLiant MicroServer Gen10 Plus v2 Xeon E-2314 32GB 32TB HDD Tower Server

SKU CH-86D6-FP3W0

A compact tower server with a Xeon E-2314 four-core processor at 2.8 GHz, 32 GB DDR4 memory and 32 TB of SATA hard-disk storage

  • Xeon E-2314 4-core CPU reaches 4.5GHz turbo for responsive small-business workloads
  • 32GB DDR4 3200MHz memory handles multi-tasking and virtual machines smoothly
  • 32TB across four 8TB SATA drives gives large local storage capacity
  • Embedded 1Gb 4-port controller provides flexible wired network connectivity
  • iLO remote management enables headless server monitoring and control

MicroServer Gen10 Plus v2 for Small Business

This HPE ProLiant tower server targets small-business workloads with a Xeon E-2314 four-core processor running at 2.8 GHz and boosting to 4.5 GHz. It ships with 32 GB of DDR4-3200 unbuffered memory in two 16 GB modules and 32 TB of raw storage across four 8 TB SATA hard drives. Hard drives and memory arrive separately and must be installed before use.

Upgrade from basic NAS or older tower

The system replaces entry-level network-attached storage or previous-generation MicroServer units when compute-heavy tasks such as virtualisation or database hosting demand a Xeon CPU and ECC-capable memory. The jump is worth it when RAID-protected capacity and remote management via iLO become daily operational requirements rather than occasional conveniences.

SATA III and single-supply limits

Four 3.5-inch drive bays connect through a 6 Gb/s SATA III interface backed by the Smart Array VROC controller, capping throughput to the speed of mechanical disks. A single power supply provides no redundancy, so any power-module failure stops the entire server until replaced. The embedded 1 Gb four-port controller also bounds network throughput to gigabit rates.

Privalumai

  • Xeon E-2314 4-core CPU reaches 4.5GHz turbo for responsive small-business workloads
  • 32GB DDR4 3200MHz memory handles multi-tasking and virtual machines smoothly
  • 32TB across four 8TB SATA drives gives large local storage capacity
  • Embedded 1Gb 4-port controller provides flexible wired network connectivity
  • iLO remote management enables headless server monitoring and control

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How many 3.5-inch drive bays does the MicroServer Gen10 Plus v2 have for the four 8TB SATA HDDs?

The chassis provides four 3.5-inch bays, matching the 32TB (4 x 8TB) SATA III HDD kit supplied with the server.

What is the correct order for installing the two 16GB DDR4 3200MHz modules and the four 8TB drives?

Install the two 16GB DDR4 modules into the two DIMM slots first, then mount the four 3.5-inch SATA drives into the drive bays and connect each to the onboard SATA ports.

When should the four 8TB SATA HDDs in the RAID array be considered for replacement?

Plan replacement when SMART monitoring via iLO reports reallocated sectors, rising error counts, or after the drives reach their rated workload limits in continuous operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.