Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Compact tower server with matte silver finish and front drive bays

HPE

HPE ProLiant MicroServer Gen10 Plus v2 Xeon E-2314 32GB 32TB HDD Tower Server

SKU CH-86D6-FP3W0

A compact tower server with a Xeon E-2314 four-core processor at 2.8 GHz, 32 GB DDR4 memory and 32 TB of SATA hard-disk storage

  • Xeon E-2314 4-core CPU reaches 4.5GHz turbo for responsive small-business workloads
  • 32GB DDR4 3200MHz memory handles multi-tasking and virtual machines smoothly
  • 32TB across four 8TB SATA drives gives large local storage capacity
  • Embedded 1Gb 4-port controller provides flexible wired network connectivity
  • iLO remote management enables headless server monitoring and control

MicroServer Gen10 Plus v2 for Small Business

This HPE ProLiant tower server targets small-business workloads with a Xeon E-2314 four-core processor running at 2.8 GHz and boosting to 4.5 GHz. It ships with 32 GB of DDR4-3200 unbuffered memory in two 16 GB modules and 32 TB of raw storage across four 8 TB SATA hard drives. Hard drives and memory arrive separately and must be installed before use.

Upgrade from basic NAS or older tower

The system replaces entry-level network-attached storage or previous-generation MicroServer units when compute-heavy tasks such as virtualisation or database hosting demand a Xeon CPU and ECC-capable memory. The jump is worth it when RAID-protected capacity and remote management via iLO become daily operational requirements rather than occasional conveniences.

SATA III and single-supply limits

Four 3.5-inch drive bays connect through a 6 Gb/s SATA III interface backed by the Smart Array VROC controller, capping throughput to the speed of mechanical disks. A single power supply provides no redundancy, so any power-module failure stops the entire server until replaced. The embedded 1 Gb four-port controller also bounds network throughput to gigabit rates.

I korthet

  • Xeon E-2314 4-core CPU reaches 4.5GHz turbo for responsive small-business workloads
  • 32GB DDR4 3200MHz memory handles multi-tasking and virtual machines smoothly
  • 32TB across four 8TB SATA drives gives large local storage capacity
  • Embedded 1Gb 4-port controller provides flexible wired network connectivity
  • iLO remote management enables headless server monitoring and control

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

How many 3.5-inch drive bays does the MicroServer Gen10 Plus v2 have for the four 8TB SATA HDDs?

The chassis provides four 3.5-inch bays, matching the 32TB (4 x 8TB) SATA III HDD kit supplied with the server.

What is the correct order for installing the two 16GB DDR4 3200MHz modules and the four 8TB drives?

Install the two 16GB DDR4 modules into the two DIMM slots first, then mount the four 3.5-inch SATA drives into the drive bays and connect each to the onboard SATA ports.

When should the four 8TB SATA HDDs in the RAID array be considered for replacement?

Plan replacement when SMART monitoring via iLO reports reallocated sectors, rising error counts, or after the drives reach their rated workload limits in continuous operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.