Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

HYTE

HYTE CS-HYTE-Y70-BM Blueberry Milk PC case

SKU CH-SZW0-6MEAJ MPN CS-HYTE-Y70-BM

Mid-tower ATX case with three tempered-glass panels, dual-chamber layout and vertical GPU mounting via an included PCIe 4.0 riser

  • ColorBlueberry Milk
  • Case MaterialABS / Steel / Tempered Glass
  • Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
  • Side Panel3 x Sides Tempered Glass Panel
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays4
  • Blueberry Milk finish with three-sided tempered glass shows off every component
  • Vertical four-slot GPU mount includes PCIe 4.0 x16 riser with matching canopy
  • Side radiator support up to 360 mm and 125 mm thick for extreme cooling
  • Top mount adjusts to 68 mm thickness for flexible radiator or fan placement
  • Cold-floor area fits three 120 mm or two 140 mm fans up to 32 mm thick

Blueberry Milk dual-chamber ATX case

The HYTE Y70 in Blueberry Milk is a dual-chamber mid-tower built from ABS, steel and three tempered-glass panels. It accepts ATX, E-ATX, Micro-ATX and ITX motherboards and presents a soft, creamy exterior with a milky PCIe canopy for a unified look.

Capacity and cooling headroom

The chassis fits CPU coolers up to 180 mm tall and graphics cards up to four slots wide. A side bracket takes a 360 mm radiator up to 125 mm thick, the top supports a 68 mm-thick radiator, and the floor can hold three 120 mm or two 140 mm fans up to 32 mm thick. Two 3.5-inch and four 2.5-inch drive bays provide storage room.

Bundled PCIe 4.0 riser and cable aids

A luxury PCIe 4.0 x16 riser cable with a colour-matched canopy is included, enabling vertical GPU mounting without signal loss. Reusable Velcro straps, labelled routing points, floating storage sleds and a tactile blue power switch simplify assembly and cable management.

Privalumai

  • Blueberry Milk finish with three-sided tempered glass shows off every component
  • Vertical four-slot GPU mount includes PCIe 4.0 x16 riser with matching canopy
  • Side radiator support up to 360 mm and 125 mm thick for extreme cooling
  • Top mount adjusts to 68 mm thickness for flexible radiator or fan placement
  • Cold-floor area fits three 120 mm or two 140 mm fans up to 32 mm thick

Specifikacijos

BrandHYTE
ModelCS-HYTE-Y70-BM
ColorBlueberry Milk
Case MaterialABS / Steel / Tempered Glass
Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
Side Panel3 x Sides Tempered Glass Panel
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays4
Fan OptionsBottom - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm / Top - 3 x 120mm
Pre-installed FansNo Fan Installed
Max CPU Cooler Height180 mm
Dimensions21.8" x 16" x 22.5"
Siuntos svoris12.43 kg
Pakuotės dydis561 × 549 × 406 mm

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will a 360 mm radiator fit in the side panel?

Yes, the side panel supports a 360 mm radiator up to 125 mm thick for high-capacity liquid cooling.

What GPU thickness can be mounted vertically?

The included PCIe 4.0 riser allows 4-slot vertical graphics cards with extra clearance between the card and glass.

Which fan sizes can be installed on the bottom?

The floor accepts three 120 mm fans or two 140 mm fans up to 32 mm thick for direct GPU airflow.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.