Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход

HYTE

HYTE CS-HYTE-Y70-BM Blueberry Milk PC case

SKU CH-SZW0-6MEAJ MPN CS-HYTE-Y70-BM

Mid-tower ATX case with three tempered-glass panels, dual-chamber layout and vertical GPU mounting via an included PCIe 4.0 riser

  • ColorBlueberry Milk
  • Case MaterialABS / Steel / Tempered Glass
  • Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
  • Side Panel3 x Sides Tempered Glass Panel
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays4
  • Blueberry Milk finish with three-sided tempered glass shows off every component
  • Vertical four-slot GPU mount includes PCIe 4.0 x16 riser with matching canopy
  • Side radiator support up to 360 mm and 125 mm thick for extreme cooling
  • Top mount adjusts to 68 mm thickness for flexible radiator or fan placement
  • Cold-floor area fits three 120 mm or two 140 mm fans up to 32 mm thick

Blueberry Milk dual-chamber ATX case

The HYTE Y70 in Blueberry Milk is a dual-chamber mid-tower built from ABS, steel and three tempered-glass panels. It accepts ATX, E-ATX, Micro-ATX and ITX motherboards and presents a soft, creamy exterior with a milky PCIe canopy for a unified look.

Capacity and cooling headroom

The chassis fits CPU coolers up to 180 mm tall and graphics cards up to four slots wide. A side bracket takes a 360 mm radiator up to 125 mm thick, the top supports a 68 mm-thick radiator, and the floor can hold three 120 mm or two 140 mm fans up to 32 mm thick. Two 3.5-inch and four 2.5-inch drive bays provide storage room.

Bundled PCIe 4.0 riser and cable aids

A luxury PCIe 4.0 x16 riser cable with a colour-matched canopy is included, enabling vertical GPU mounting without signal loss. Reusable Velcro straps, labelled routing points, floating storage sleds and a tactile blue power switch simplify assembly and cable management.

Акценти

  • Blueberry Milk finish with three-sided tempered glass shows off every component
  • Vertical four-slot GPU mount includes PCIe 4.0 x16 riser with matching canopy
  • Side radiator support up to 360 mm and 125 mm thick for extreme cooling
  • Top mount adjusts to 68 mm thickness for flexible radiator or fan placement
  • Cold-floor area fits three 120 mm or two 140 mm fans up to 32 mm thick

Спецификации

BrandHYTE
ModelCS-HYTE-Y70-BM
ColorBlueberry Milk
Case MaterialABS / Steel / Tempered Glass
Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
Side Panel3 x Sides Tempered Glass Panel
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays4
Fan OptionsBottom - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm / Top - 3 x 120mm
Pre-installed FansNo Fan Installed
Max CPU Cooler Height180 mm
Dimensions21.8" x 16" x 22.5"
Тегло на пратката12.43 kg
Размери на опаковката561 × 549 × 406 mm

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Will a 360 mm radiator fit in the side panel?

Yes, the side panel supports a 360 mm radiator up to 125 mm thick for high-capacity liquid cooling.

What GPU thickness can be mounted vertically?

The included PCIe 4.0 riser allows 4-slot vertical graphics cards with extra clearance between the card and glass.

Which fan sizes can be installed on the bottom?

The floor accepts three 120 mm fans or two 140 mm fans up to 32 mm thick for direct GPU airflow.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.