Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Three ESP32 USB-C dev boards with matching breakout boards

KEHIPI

KEHIPI 3× ESP32 CP2012 USB-C 38-Pin DevKit + Breakout Boards

SKU CH-GSJH-0VD96

Three ESP32 USB-C development boards with CP2012 chips, 38 pins each, plus matching breakout boards that split every GPIO into two connections

  • USB-C CP2012 interface simplifies power and data
  • Dual-core ESP32 with integrated Wi-Fi and Bluetooth
  • 38-pin narrow board fits standard breadboards
  • Breakout board doubles each GPIO to two pins
  • Three complete sets include boards and breakouts

Three USB-C ESP32 dev boards with breakout shields

This pack supplies three ESP32 CP2012 USB-C development boards, each exposing 38 pins in a narrow, no-mounting-hole form factor. Dual-core 2.4 GHz Wi-Fi and Bluetooth are integrated with on-board antenna, RF balun, power amplifiers and power management. The CP2012 USB-C interface provides direct programming and power. Makers, educators and IoT prototypers can start three parallel projects or equip a small team from one box.

Check pin count and mounting-hole layout before

The breakout shields are only compatible with 38-pin ESP32 boards that lack mounting holes. Verify your existing modules match that exact variant; 30-pin or hole-equipped boards will not fit the one-to-two GPIO expansion headers. Each shield measures 7.8 by 6.3 by 1 cm on a 1.6 mm FR-4 PCB with tin-plated pads, so confirm breadboard spacing and mechanical clearance in your current rig.

Breadboard-friendly cores free GPIO for sensors

The narrow 38-pin core boards slide cleanly into standard breadboards, while each breakout shield doubles one GPIO pin into two stable contacts on a two-layer board. That expansion lets you attach more peripherals without soldering or jumper wires. Three identical sets let you develop, test and deploy a sensor node, a gateway and a spare simultaneously, keeping firmware consistent across units.

Privalumai

  • USB-C CP2012 interface simplifies power and data
  • Dual-core ESP32 with integrated Wi-Fi and Bluetooth
  • 38-pin narrow board fits standard breadboards
  • Breakout board doubles each GPIO to two pins
  • Three complete sets include boards and breakouts

Specifikacijos

BrandAITRIP

Klausimai apie šią prekę

Does the box contain three CP2012 USB-C development boards and three breakout boards ready to use?

The package includes three ESP32 CP2012 USB-C 38-pin development board modules and three matching breakout boards that expand each GPIO pin to two connections.

Which breakout board version should I pick for the 38-pin narrow board without mounting holes?

The supplied breakout boards are the no-mounting-hole version designed only for the 38-pin narrow ESP32 development board.

What does the 2.4 GHz dual-mode Wi-Fi and Bluetooth figure mean when the board is running in a project?

The ESP32 chip supports STA, AP and STA+AP operation on the 2.4 GHz band, giving simultaneous Wi-Fi and Bluetooth connectivity for IoT edge applications.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.