Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Three ESP32 USB-C dev boards with matching breakout boards

KEHIPI

KEHIPI 3× ESP32 CP2012 USB-C 38-Pin DevKit + Breakout Boards

SKU CH-GSJH-0VD96

Three ESP32 USB-C development boards with CP2012 chips, 38 pins each, plus matching breakout boards that split every GPIO into two connections

  • USB-C CP2012 interface simplifies power and data
  • Dual-core ESP32 with integrated Wi-Fi and Bluetooth
  • 38-pin narrow board fits standard breadboards
  • Breakout board doubles each GPIO to two pins
  • Three complete sets include boards and breakouts

Three USB-C ESP32 dev boards with breakout shields

This pack supplies three ESP32 CP2012 USB-C development boards, each exposing 38 pins in a narrow, no-mounting-hole form factor. Dual-core 2.4 GHz Wi-Fi and Bluetooth are integrated with on-board antenna, RF balun, power amplifiers and power management. The CP2012 USB-C interface provides direct programming and power. Makers, educators and IoT prototypers can start three parallel projects or equip a small team from one box.

Check pin count and mounting-hole layout before

The breakout shields are only compatible with 38-pin ESP32 boards that lack mounting holes. Verify your existing modules match that exact variant; 30-pin or hole-equipped boards will not fit the one-to-two GPIO expansion headers. Each shield measures 7.8 by 6.3 by 1 cm on a 1.6 mm FR-4 PCB with tin-plated pads, so confirm breadboard spacing and mechanical clearance in your current rig.

Breadboard-friendly cores free GPIO for sensors

The narrow 38-pin core boards slide cleanly into standard breadboards, while each breakout shield doubles one GPIO pin into two stable contacts on a two-layer board. That expansion lets you attach more peripherals without soldering or jumper wires. Three identical sets let you develop, test and deploy a sensor node, a gateway and a spare simultaneously, keeping firmware consistent across units.

Poudarki

  • USB-C CP2012 interface simplifies power and data
  • Dual-core ESP32 with integrated Wi-Fi and Bluetooth
  • 38-pin narrow board fits standard breadboards
  • Breakout board doubles each GPIO to two pins
  • Three complete sets include boards and breakouts

Specifikacije

BrandAITRIP

Vprašanja o tem izdelku

Does the box contain three CP2012 USB-C development boards and three breakout boards ready to use?

The package includes three ESP32 CP2012 USB-C 38-pin development board modules and three matching breakout boards that expand each GPIO pin to two connections.

Which breakout board version should I pick for the 38-pin narrow board without mounting holes?

The supplied breakout boards are the no-mounting-hole version designed only for the 38-pin narrow ESP32 development board.

What does the 2.4 GHz dual-mode Wi-Fi and Bluetooth figure mean when the board is running in a project?

The ESP32 chip supports STA, AP and STA+AP operation on the 2.4 GHz band, giving simultaneous Wi-Fi and Bluetooth connectivity for IoT edge applications.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.