Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular metal power supply unit with ventilation slots and terminal connectors

KHACHIMO

KHACHIMO HWS600 24V 600W power supply

SKU CH-GR0N-VX2CJ

Delivers 24 V at 600 W in an ATX switching power supply for reliable PC operation

  • TypeATX
  • 24 V output matches industrial equipment requirements
  • 600 W capacity powers multiple high-load modules
  • ATX form factor fits standard chassis layouts
  • Tested and verified for reliable operation

Industrial 24V 600W unit

This switching power supply delivers a single 24 volt output rated at 600 watts. It is built for industrial equipment, test benches and automation cabinets that require a stable DC rail. The ATX form factor allows mounting in standard enclosures.

Capacity and headroom

The 600 watt rating supports continuous loads such as motor drives, LED arrays or PLC systems running near full power. Headroom shrinks when ambient temperatures rise or when cables add voltage drop, so sustained peaks above the rated current are not supported. Builders needing multiple output voltages or redundant modules should look elsewhere.

Privalumai

  • 24 V output matches industrial equipment requirements
  • 600 W capacity powers multiple high-load modules
  • ATX form factor fits standard chassis layouts
  • Tested and verified for reliable operation

Specifikacijos

TypeATX

Klausimai apie šią prekę

Will the 600W output run reliably with an older ATX motherboard that still uses a 20-pin main connector?

The unit follows the ATX form factor and provides 600W at 24V, so it will power a 20-pin board when used with a standard 24-to-20 pin adapter.

How can I confirm the 24V rail is delivering stable power after installation?

Measure the output with a multimeter under load; a steady reading at 24V shows the supply is operating as specified.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.