Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular silver metal server PSU with rear fan grille and power socket

Lemincrash

Lemincrash HK300-95FP S1 200W server power supply

SKU CH-CVRN-61YGN

200 W single server PSU delivering 12 V at 16 A, 3.3 V at 13 A, 5 V at 13 A and 5 V standby at 2.5 A for Acbel B50R1, B500, B505, B510, W2600I, W4600I and W6000I systems

  • Single/RedundantSingle
  • Maximum Power200W
  • Output+12V==16A(YELLOW) + 3.3V==13A(ORANGE) +5V= 13A(RED) +5Vsb =
  • Input Voltage200 - 240 V
  • Input Frequency Range50/60 Hz
  • FeaturesNew
  • Delivers 200W maximum power for reliable server operation
  • Provides +12V at 16A for stable high-current loads
  • Supplies +3.3V at 13A and +5V at 13A for versatile rail coverage
  • Includes +5Vsb at 2.5A for standby functionality
  • Operates on 200-240V AC input at 50/60Hz for wide compatibility

200 W single server PSU

The Lemincrash HK300-95FP S1 is a new 200 W single-unit server power supply. It accepts 200 – 240 V input at 50/60 Hz and carries the 80 Plus series designation. The unit weighs 700 g and ships as a standalone PSU.

Replacement for Acbel B50R1 series

This supply suits technicians replacing an Acbel B50R1, B500, B505, B510, W6000I, W4600I or W2600I unit where the part number 36-001759 or PC9024 is specified. Builders needing redundant hot-swap modules or an input range that starts below 200 V should look at a different design.

12 V rail delivers 16 A

The +12 V output provides 16 A, while the +3.3 V and +5 V rails each supply 13 A and the +5 V standby rail supplies 2.5 A. Confirm that the combined 200 W limit and the 12 V current rating match the server’s load before ordering.

Privalumai

  • Delivers 200W maximum power for reliable server operation
  • Provides +12V at 16A for stable high-current loads
  • Supplies +3.3V at 13A and +5V at 13A for versatile rail coverage
  • Includes +5Vsb at 2.5A for standby functionality
  • Operates on 200-240V AC input at 50/60Hz for wide compatibility

Specifikacijos

BrandLemincrash
Series80 Plus
ModelHK300-95FP S1
Single/RedundantSingle
Maximum Power200W
Output+12V==16A(YELLOW)
+ 3.3V==13A(ORANGE)
+5V= 13A(RED)
+5Vsb = 2.5A(PURPLE)
Input Voltage200 - 240 V
Input Frequency Range50/60 Hz
FeaturesNew
Weight700g
Humidity20%-90%
Package ContentsPSU*1

Klausimai apie šią prekę

What server chassis and backplane must I already have to mount this HK300-95FP S1 unit?

The supply is built for Acbel B50r1, B500, B505, B510, W6000I, W4600I and W2600I platforms, so your chassis must accept that form factor and the matching backplane connector.

Will the HK300-95FP S1 share load with an older Acbel supply I keep in the same rack?

No, this is a single 200 W unit without redundant signalling, so it cannot current-share with another supply.

How do I confirm the HK300-95FP S1 is delivering its rated rails after installation?

Measure +12 V at 16 A, +3.3 V at 13 A, +5 V at 13 A and +5 Vsb at 2.5 A under load; all voltages should stay within ATX tolerance.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.