We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver metal server PSU with rear fan grille and power socket

Lemincrash

Lemincrash HK300-95FP S1 200W server power supply

SKU CH-CVRN-61YGN

200 W single server PSU delivering 12 V at 16 A, 3.3 V at 13 A, 5 V at 13 A and 5 V standby at 2.5 A for Acbel B50R1, B500, B505, B510, W2600I, W4600I and W6000I systems

  • Single/RedundantSingle
  • Maximum Power200W
  • Output+12V==16A(YELLOW) + 3.3V==13A(ORANGE) +5V= 13A(RED) +5Vsb =
  • Input Voltage200 - 240 V
  • Input Frequency Range50/60 Hz
  • FeaturesNew
  • Delivers 200W maximum power for reliable server operation
  • Provides +12V at 16A for stable high-current loads
  • Supplies +3.3V at 13A and +5V at 13A for versatile rail coverage
  • Includes +5Vsb at 2.5A for standby functionality
  • Operates on 200-240V AC input at 50/60Hz for wide compatibility

200 W single server PSU

The Lemincrash HK300-95FP S1 is a new 200 W single-unit server power supply. It accepts 200 – 240 V input at 50/60 Hz and carries the 80 Plus series designation. The unit weighs 700 g and ships as a standalone PSU.

Replacement for Acbel B50R1 series

This supply suits technicians replacing an Acbel B50R1, B500, B505, B510, W6000I, W4600I or W2600I unit where the part number 36-001759 or PC9024 is specified. Builders needing redundant hot-swap modules or an input range that starts below 200 V should look at a different design.

12 V rail delivers 16 A

The +12 V output provides 16 A, while the +3.3 V and +5 V rails each supply 13 A and the +5 V standby rail supplies 2.5 A. Confirm that the combined 200 W limit and the 12 V current rating match the server’s load before ordering.

Highlights

  • Delivers 200W maximum power for reliable server operation
  • Provides +12V at 16A for stable high-current loads
  • Supplies +3.3V at 13A and +5V at 13A for versatile rail coverage
  • Includes +5Vsb at 2.5A for standby functionality
  • Operates on 200-240V AC input at 50/60Hz for wide compatibility

Specifications

BrandLemincrash
Series80 Plus
ModelHK300-95FP S1
Single/RedundantSingle
Maximum Power200W
Output+12V==16A(YELLOW)
+ 3.3V==13A(ORANGE)
+5V= 13A(RED)
+5Vsb = 2.5A(PURPLE)
Input Voltage200 - 240 V
Input Frequency Range50/60 Hz
FeaturesNew
Weight700g
Humidity20%-90%
Package ContentsPSU*1

Questions about this item

What server chassis and backplane must I already have to mount this HK300-95FP S1 unit?

The supply is built for Acbel B50r1, B500, B505, B510, W6000I, W4600I and W2600I platforms, so your chassis must accept that form factor and the matching backplane connector.

Will the HK300-95FP S1 share load with an older Acbel supply I keep in the same rack?

No, this is a single 200 W unit without redundant signalling, so it cannot current-share with another supply.

How do I confirm the HK300-95FP S1 is delivering its rated rails after installation?

Measure +12 V at 16 A, +3.3 V at 13 A, +5 V at 13 A and +5 Vsb at 2.5 A under load; all voltages should stay within ATX tolerance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.