Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with Ethernet port, four USB sockets, HDMI, camera connectors, fan header and GPIO pins

LORDWORLD

LORDWORLD Compute Module IO Board with PoE 10/100M Ethernet 4 USB 2 CSI HDMI DSI UART Fan SMPS

SKU CH-4TRE-V5WS5

Breakout board for Raspberry Pi Compute Modules 3 and 3+ adds PoE Ethernet, four USB ports, dual CSI, HDMI, DSI, UART and a fan header

  • Connect Raspberry Pi HATs via standard GPIO header
  • Power over Ethernet with 10/100M auto-negotiation port
  • Expand connectivity using four USB 2.0 ports
  • Attach two cameras through dual CSI interfaces
  • Drive displays via onboard HDMI and DSI connectors

Compatible Compute Modules

This IO board accepts Raspberry Pi Compute Module 3, 3L, 3+ and 3+L units. It exposes the standard 40-pin GPIO header so existing HATs can be attached directly. The board targets developers building embedded prototypes or edge appliances that need a carrier with integrated peripherals.

Ideal for PoE projects not for gigabit

Engineers who want a single-cable power and data link will benefit from the 10/100M Ethernet port with PoE support. Makers needing multiple USB peripherals or dual CSI cameras also fit this board. Builders requiring gigabit throughput or wireless connectivity should look at something else.

PoE-enabled 10/100 Ethernet decides fit

The onboard Ethernet controller negotiates at 10 or 100 Mbit/s and accepts Power over Ethernet, removing the need for a separate supply. If your deployment depends on that single-cable installation, this carrier matches the requirement; otherwise a simpler breakout may suffice.

Privalumai

  • Connect Raspberry Pi HATs via standard GPIO header
  • Power over Ethernet with 10/100M auto-negotiation port
  • Expand connectivity using four USB 2.0 ports
  • Attach two cameras through dual CSI interfaces
  • Drive displays via onboard HDMI and DSI connectors

Specifikacijos

BrandLORDWORLD

Klausimai apie šią prekę

What size HATs can the 40-pin GPIO header on this IO board accept?

The board includes a standard 40-pin Raspberry Pi GPIO header, so any HAT designed for that pinout will connect directly.

How do I power the board over the Ethernet port, and what setting enables PoE?

Connect a PoE-capable switch or injector to the 10/100M Ethernet port; the onboard isolated SMPS handles the power negotiation automatically.

Can the cooling fan be replaced later, and what connector does it use?

The fan plugs into a dedicated fan interface that runs automatically on power-up or can be toggled via IO pins, so a replacement fan with the same connector can be swapped in.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.