Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular circuit board with Ethernet port, four USB sockets, HDMI, camera connectors, fan header and GPIO pins

LORDWORLD

LORDWORLD Compute Module IO Board with PoE 10/100M Ethernet 4 USB 2 CSI HDMI DSI UART Fan SMPS

SKU CH-4TRE-V5WS5

Breakout board for Raspberry Pi Compute Modules 3 and 3+ adds PoE Ethernet, four USB ports, dual CSI, HDMI, DSI, UART and a fan header

  • Connect Raspberry Pi HATs via standard GPIO header
  • Power over Ethernet with 10/100M auto-negotiation port
  • Expand connectivity using four USB 2.0 ports
  • Attach two cameras through dual CSI interfaces
  • Drive displays via onboard HDMI and DSI connectors

Compatible Compute Modules

This IO board accepts Raspberry Pi Compute Module 3, 3L, 3+ and 3+L units. It exposes the standard 40-pin GPIO header so existing HATs can be attached directly. The board targets developers building embedded prototypes or edge appliances that need a carrier with integrated peripherals.

Ideal for PoE projects not for gigabit

Engineers who want a single-cable power and data link will benefit from the 10/100M Ethernet port with PoE support. Makers needing multiple USB peripherals or dual CSI cameras also fit this board. Builders requiring gigabit throughput or wireless connectivity should look at something else.

PoE-enabled 10/100 Ethernet decides fit

The onboard Ethernet controller negotiates at 10 or 100 Mbit/s and accepts Power over Ethernet, removing the need for a separate supply. If your deployment depends on that single-cable installation, this carrier matches the requirement; otherwise a simpler breakout may suffice.

Punti di forza

  • Connect Raspberry Pi HATs via standard GPIO header
  • Power over Ethernet with 10/100M auto-negotiation port
  • Expand connectivity using four USB 2.0 ports
  • Attach two cameras through dual CSI interfaces
  • Drive displays via onboard HDMI and DSI connectors

Caratteristiche tecniche

BrandLORDWORLD

Domande su questo articolo

What size HATs can the 40-pin GPIO header on this IO board accept?

The board includes a standard 40-pin Raspberry Pi GPIO header, so any HAT designed for that pinout will connect directly.

How do I power the board over the Ethernet port, and what setting enables PoE?

Connect a PoE-capable switch or injector to the 10/100M Ethernet port; the onboard isolated SMPS handles the power negotiation automatically.

Can the cooling fan be replaced later, and what connector does it use?

The fan plugs into a dedicated fan interface that runs automatically on power-up or can be toggled via IO pins, so a replacement fan with the same connector can be swapped in.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.