Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green low-profile PCIe x1 card with single SC fiber port

LR-LINK

LR-LINK LREC6230PF PCIe x1 1000BASE Fiber Network Card

SKU CH-001G-0R3YZ

Single-port fibre Ethernet adapter with Intel I210 controller, PCIe 2.1 x1 link, SC connector and 1000 Mbps speed

  • StandardsIEEE 802.3az
  • Speed1000Mbps
  • Connectors1 x SC
  • InterfacePCI-Express
  • BUSPCI Express v2.1 (2.5GT/s) x1
  • Temperature0°C ~ 55°C

Ports 1x SC multi-mode

Option LREC6230PF

  • Gigabit fibre link resists EMI and lightning
  • Intel I210IS controller enables PXE and DPDK workloads
  • PCIe 2.1 x1 slot fits low-profile or full-height builds
  • Single SC multi-mode port for desktop fibre runs
  • Operates 0 °C to 55 °C at up to 90 % humidity

Single-port 1000BASE fiber adapter

The LR-LINK LREC6230PF is a single-port Gigabit Ethernet adapter that connects over SC multi-mode fibre. It uses an Intel I210IS controller on a PCI Express 2.1 x1 bus and targets desktops or servers needing a secure, interference-free 1000Mbps link for fibre-to-the-desktop deployments.

Low-profile bracket eases fit.

Both low-profile and full-height brackets are supplied so the card fits standard and slim chassis. Installation is a simple PCIe x1 insertion, but fibre patch cords must respect the minimum bend radius to avoid signal loss; the SC connector clicks in place but can be dislodged if cables are routed tightly behind the bracket.

Handles 1000Mbps over multi-mode fibre.

The adapter delivers a full 1000Mbps data rate on multi-mode fibre with IEEE 802.3az compliance and DPDK support for packet-processing workloads. It will not negotiate 10G speeds, nor does it support single-mode transceivers; environments needing longer reach or higher bandwidth require a different model.

Privalumai

  • Gigabit fibre link resists EMI and lightning
  • Intel I210IS controller enables PXE and DPDK workloads
  • PCIe 2.1 x1 slot fits low-profile or full-height builds
  • Single SC multi-mode port for desktop fibre runs
  • Operates 0 °C to 55 °C at up to 90 % humidity

Specifikacijos

BrandLR-LINK
ModelLREC6230PF
StandardsIEEE 802.3az
Speed1000Mbps
Connectors1 x SC
InterfacePCI-Express
BUSPCI Express v2.1 (2.5GT/s) x1
Temperature0°C ~ 55°C
Humidity0 % ~ 90 % (Non-condensing)

Kiti šio modelio variantai

Dar 2 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How can I verify the LREC6230PF is operating correctly after installation?

The adapter uses an Intel I210IS controller and supports PXE boot; a successful PXE network boot or a 1000Mbps link light on the SC connector confirms normal operation.

What comes in the box with the LREC6230PF and what must I purchase separately?

The card includes both a low-profile and a full-height bracket; you must supply your own SC-type multi-mode fibre patch cable to connect to the single SC port.

Which LREC6230PF variant should I choose for a 1000Mbps multi-mode fibre link?

Choose the base LREC6230PF model — it provides a single SC multi-mode connector, PCIe v2.1 x1 interface and 1000Mbps data rate, unlike the LX single-mode or SFP versions.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.