Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green low-profile PCIe x1 card with single SC fiber port

LR-LINK

LR-LINK LREC6230PF PCIe x1 1000BASE Fiber Network Card

SKU CH-001G-0R3YZ

Single-port fibre Ethernet adapter with Intel I210 controller, PCIe 2.1 x1 link, SC connector and 1000 Mbps speed

  • StandardsIEEE 802.3az
  • Speed1000Mbps
  • Connectors1 x SC
  • InterfacePCI-Express
  • BUSPCI Express v2.1 (2.5GT/s) x1
  • Temperature0°C ~ 55°C

Ports 1x SC multi-mode

Option LREC6230PF

  • Gigabit fibre link resists EMI and lightning
  • Intel I210IS controller enables PXE and DPDK workloads
  • PCIe 2.1 x1 slot fits low-profile or full-height builds
  • Single SC multi-mode port for desktop fibre runs
  • Operates 0 °C to 55 °C at up to 90 % humidity

Single-port 1000BASE fiber adapter

The LR-LINK LREC6230PF is a single-port Gigabit Ethernet adapter that connects over SC multi-mode fibre. It uses an Intel I210IS controller on a PCI Express 2.1 x1 bus and targets desktops or servers needing a secure, interference-free 1000Mbps link for fibre-to-the-desktop deployments.

Low-profile bracket eases fit.

Both low-profile and full-height brackets are supplied so the card fits standard and slim chassis. Installation is a simple PCIe x1 insertion, but fibre patch cords must respect the minimum bend radius to avoid signal loss; the SC connector clicks in place but can be dislodged if cables are routed tightly behind the bracket.

Handles 1000Mbps over multi-mode fibre.

The adapter delivers a full 1000Mbps data rate on multi-mode fibre with IEEE 802.3az compliance and DPDK support for packet-processing workloads. It will not negotiate 10G speeds, nor does it support single-mode transceivers; environments needing longer reach or higher bandwidth require a different model.

Istaknuto

  • Gigabit fibre link resists EMI and lightning
  • Intel I210IS controller enables PXE and DPDK workloads
  • PCIe 2.1 x1 slot fits low-profile or full-height builds
  • Single SC multi-mode port for desktop fibre runs
  • Operates 0 °C to 55 °C at up to 90 % humidity

Specifikacije

BrandLR-LINK
ModelLREC6230PF
StandardsIEEE 802.3az
Speed1000Mbps
Connectors1 x SC
InterfacePCI-Express
BUSPCI Express v2.1 (2.5GT/s) x1
Temperature0°C ~ 55°C
Humidity0 % ~ 90 % (Non-condensing)

Druge verzije ovog modela

još 2 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How can I verify the LREC6230PF is operating correctly after installation?

The adapter uses an Intel I210IS controller and supports PXE boot; a successful PXE network boot or a 1000Mbps link light on the SC connector confirms normal operation.

What comes in the box with the LREC6230PF and what must I purchase separately?

The card includes both a low-profile and a full-height bracket; you must supply your own SC-type multi-mode fibre patch cable to connect to the single SC port.

Which LREC6230PF variant should I choose for a 1000Mbps multi-mode fibre link?

Choose the base LREC6230PF model — it provides a single SC multi-mode connector, PCIe v2.1 x1 interface and 1000Mbps data rate, unlike the LX single-mode or SFP versions.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.