Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Six small green RP2040 Zero development boards with unsoldered pin headers

MCDODO

MCDODO RP2040 Zero Development Board 6-Piece Set Unsoldered Pins

SKU CH-0VEN-S8988

Six RP2040 Zero boards with dual-core Cortex M0+ at 133 MHz, 264 KB SRAM and 2 MB Flash, pins unsoldered

  • TypeSingle Board Computers
  • Six boards in one pack for parallel prototyping
  • Dual-core Cortex-M0+ at 133 MHz handles concurrent tasks
  • 264 KB SRAM plus 2 MB Flash stores code and data
  • Eight PIO state machines create custom peripheral interfaces
  • Unsoldered pin headers allow flexible header choice

Six-Board RP2040 Pack

This set contains six RP2040 Zero development boards built around the RP2040 microcontroller. Each board uses a dual-core Arm Cortex-M0+ processor with a flexible clock reaching 133 MHz. They are suited for makers, educators and prototypers who need multiple identical units for parallel experiments or classroom kits.

264 KB SRAM and 2 MB Flash headroom

The 264 KB of SRAM and 2 MB of on-board Flash handle typical sensor-logging, motor-control and small networking tasks comfortably. Memory becomes a constraint when projects require large frame buffers, heavyweight protocol stacks or extensive local data logging beyond the available space.

Unsoldered pins for custom I/O

Pins arrive unsoldered so users can choose headers, sockets or direct wiring to match each build. The eight programmable I/O state machines support custom peripheral timing without CPU overhead, enabling precise signal generation for displays, communication buses or motor drivers.

Privalumai

  • Six boards in one pack for parallel prototyping
  • Dual-core Cortex-M0+ at 133 MHz handles concurrent tasks
  • 264 KB SRAM plus 2 MB Flash stores code and data
  • Eight PIO state machines create custom peripheral interfaces
  • Unsoldered pin headers allow flexible header choice

Specifikacijos

TypeSingle Board Computers

Klausimai apie šią prekę

Will the dual-core 264KB Cortex M0+ processor at 133 MHz work alongside my older 8-bit microcontroller boards?

The RP2040 Zero uses a 133 MHz dual-core Cortex M0+ with 264 KB SRAM, so it can communicate with legacy boards over GPIO or serial links you wire yourself.

How do I verify the 2 MB flash and 8 PIO state machines are functioning after I solder the pins?

Flash the standard blink sketch, then run a PIO test that toggles each state machine; successful LED patterns confirm both flash and PIO operation.

The set includes six unsoldered boards — what else must I purchase to start developing?

You will need pin headers, a micro-USB cable, a soldering iron, and a computer running the Pico SDK or MicroPython toolchain.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.