暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Six small green RP2040 Zero development boards with unsoldered pin headers

MCDODO

MCDODO RP2040 Zero Development Board 6-Piece Set Unsoldered Pins

SKU CH-0VEN-S8988

Six RP2040 Zero boards with dual-core Cortex M0+ at 133 MHz, 264 KB SRAM and 2 MB Flash, pins unsoldered

  • TypeSingle Board Computers
  • Six boards in one pack for parallel prototyping
  • Dual-core Cortex-M0+ at 133 MHz handles concurrent tasks
  • 264 KB SRAM plus 2 MB Flash stores code and data
  • Eight PIO state machines create custom peripheral interfaces
  • Unsoldered pin headers allow flexible header choice

Six-Board RP2040 Pack

This set contains six RP2040 Zero development boards built around the RP2040 microcontroller. Each board uses a dual-core Arm Cortex-M0+ processor with a flexible clock reaching 133 MHz. They are suited for makers, educators and prototypers who need multiple identical units for parallel experiments or classroom kits.

264 KB SRAM and 2 MB Flash headroom

The 264 KB of SRAM and 2 MB of on-board Flash handle typical sensor-logging, motor-control and small networking tasks comfortably. Memory becomes a constraint when projects require large frame buffers, heavyweight protocol stacks or extensive local data logging beyond the available space.

Unsoldered pins for custom I/O

Pins arrive unsoldered so users can choose headers, sockets or direct wiring to match each build. The eight programmable I/O state machines support custom peripheral timing without CPU overhead, enabling precise signal generation for displays, communication buses or motor drivers.

特長

  • Six boards in one pack for parallel prototyping
  • Dual-core Cortex-M0+ at 133 MHz handles concurrent tasks
  • 264 KB SRAM plus 2 MB Flash stores code and data
  • Eight PIO state machines create custom peripheral interfaces
  • Unsoldered pin headers allow flexible header choice

仕様

TypeSingle Board Computers

この商品に関する質問

Will the dual-core 264KB Cortex M0+ processor at 133 MHz work alongside my older 8-bit microcontroller boards?

The RP2040 Zero uses a 133 MHz dual-core Cortex M0+ with 264 KB SRAM, so it can communicate with legacy boards over GPIO or serial links you wire yourself.

How do I verify the 2 MB flash and 8 PIO state machines are functioning after I solder the pins?

Flash the standard blink sketch, then run a PIO test that toggles each state machine; successful LED patterns confirm both flash and PIO operation.

The set includes six unsoldered boards — what else must I purchase to start developing?

You will need pin headers, a micro-USB cable, a soldering iron, and a computer running the Pico SDK or MicroPython toolchain.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。