Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Three small green circuit boards with Type-C and micro-USB connectors, pin headers, and surface-mounted chips

MCDODO

MCDODO Type-C Pro Micro Atmega32U4 5V 16MHz Development Board 3pcs

SKU CH-JZD8-68KW9

ATmega32U4 microcontroller board running at 5 V and 16 MHz with Type-C and micro-USB connectors, 12 digital I/O pins and 10-bit ADC, supplied as a pack of three

  • TypeSingle Board Computers
  • ATmega32U4 at 16 MHz powers compact projects
  • 12 digital I/O pins with 5 PWM outputs
  • 4 analog inputs at 10-bit resolution
  • USB programming via Type-C and micro-USB connectors

Development Board with ATmega32U4

The MCDODO Type-C Pro Micro board uses an ATmega32U4 microcontroller running at 5 V and 16 MHz. It is supported under IDE v 1.0.1 and includes an on-board micro-USB connector for programming. The board provides 4 analogue inputs and 12 digital I/O pins, with 5 pins capable of PWM output. Hardware serial connections for Rx and Tx are also available.

For USB-HID prototyping and simple control tasks

This board suits makers building keyboards, mice or other USB-HID devices that need direct USB support from the ATmega32U4. It is less suited for projects needing more than 12 digital I/O lines, more than 4 analogue inputs, or a higher clock speed. Buyers who require on-board Wi-Fi, Bluetooth or larger flash memory should look at other platforms.

Privalumai

  • ATmega32U4 at 16 MHz powers compact projects
  • 12 digital I/O pins with 5 PWM outputs
  • 4 analog inputs at 10-bit resolution
  • USB programming via Type-C and micro-USB connectors

Specifikacijos

TypeSingle Board Computers

Klausimai apie šią prekę

Does this board need an external USB-to-serial adapter to program it from the Arduino IDE?

No, the on-board micro-USB connector lets you upload sketches directly from IDE v 1.0.1 without any extra adapter.

Can I keep using my existing 5 V shields and sensors with these three boards?

Yes, each board runs at 5 V and 16 MHz, so 5 V shields and sensors connect to the 12 digital I/Os and 4 ADC pins without level shifting.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.