暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three small green circuit boards with Type-C and micro-USB connectors, pin headers, and surface-mounted chips

MCDODO

MCDODO Type-C Pro Micro Atmega32U4 5V 16MHz Development Board 3pcs

SKU CH-JZD8-68KW9

ATmega32U4 microcontroller board running at 5 V and 16 MHz with Type-C and micro-USB connectors, 12 digital I/O pins and 10-bit ADC, supplied as a pack of three

  • TypeSingle Board Computers
  • ATmega32U4 at 16 MHz powers compact projects
  • 12 digital I/O pins with 5 PWM outputs
  • 4 analog inputs at 10-bit resolution
  • USB programming via Type-C and micro-USB connectors

Development Board with ATmega32U4

The MCDODO Type-C Pro Micro board uses an ATmega32U4 microcontroller running at 5 V and 16 MHz. It is supported under IDE v 1.0.1 and includes an on-board micro-USB connector for programming. The board provides 4 analogue inputs and 12 digital I/O pins, with 5 pins capable of PWM output. Hardware serial connections for Rx and Tx are also available.

For USB-HID prototyping and simple control tasks

This board suits makers building keyboards, mice or other USB-HID devices that need direct USB support from the ATmega32U4. It is less suited for projects needing more than 12 digital I/O lines, more than 4 analogue inputs, or a higher clock speed. Buyers who require on-board Wi-Fi, Bluetooth or larger flash memory should look at other platforms.

特長

  • ATmega32U4 at 16 MHz powers compact projects
  • 12 digital I/O pins with 5 PWM outputs
  • 4 analog inputs at 10-bit resolution
  • USB programming via Type-C and micro-USB connectors

仕様

TypeSingle Board Computers

この商品に関する質問

Does this board need an external USB-to-serial adapter to program it from the Arduino IDE?

No, the on-board micro-USB connector lets you upload sketches directly from IDE v 1.0.1 without any extra adapter.

Can I keep using my existing 5 V shields and sensors with these three boards?

Yes, each board runs at 5 V and 16 MHz, so 5 V shields and sensors connect to the 12 digital I/Os and 4 ADC pins without level shifting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。