BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
myVolts
TFX form-factor 300W replacement PSU for HP Pavilion Slimline s5660f and s5670t, delivering 100/240V input with 20+4 pin motherboard, 4-pin CPU, three Molex, floppy and three SATA connectors.
This 300 watt TFX power supply is built as a direct replacement for the HP Pavilion Slimline s5660f and s5670t models. It fits the small form factor chassis and provides the standard 20+4 pin motherboard connector along with a 4-pin CPU connector. The unit also includes three Molex, one floppy, and three SATA connectors for drives and peripherals. It supports a wide input voltage range of 100 to 240 volts.
The supply delivers a continuous 300 watts of power rather than a short-term peak rating. An 80 millimetre fan with double ball bearings handles cooling duties, designed to maintain airflow during extended workloads without excessive noise. The manufacturer notes this unit can upgrade systems originally equipped with 200, 250, 300, or 350 watt units, and the platform supports an upgrade path to 420 watts if higher capacity is later required.
Verify that your Slimline chassis accepts the TFX form factor and that the existing mounting points align with this replacement unit. Confirm your motherboard uses a 20+4 pin main power connector and a 4-pin CPU power header, as older proprietary layouts will not match. Ensure the three SATA and three Molex connectors meet your current drive count, and check that the 100 to 240 volt input range suits your local mains supply.
| Type | AT |
|---|
The 80 mm fan uses double ball bearings for quiet, reliable airflow; it keeps the 300 W unit cool without excessive noise during continuous operation.
Your motherboard needs a 20+4 pin socket, the CPU a 4-pin connector, and drives require three SATA plus three Molex plugs; a floppy lead is also included.
Yes, it replaces 200 W, 250 W, 300 W or 350 W units and delivers 300 W steady power to the existing motherboard, CPU and drives.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?