BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
myVolts
TFX form-factor 300W replacement PSU for HP Pavilion Slimline s5660f and s5670t, delivering 100/240V input with 20+4 pin motherboard, 4-pin CPU, three Molex, floppy and three SATA connectors.
This 300 watt TFX power supply is built as a direct replacement for the HP Pavilion Slimline s5660f and s5670t models. It fits the small form factor chassis and provides the standard 20+4 pin motherboard connector along with a 4-pin CPU connector. The unit also includes three Molex, one floppy, and three SATA connectors for drives and peripherals. It supports a wide input voltage range of 100 to 240 volts.
The supply delivers a continuous 300 watts of power rather than a short-term peak rating. An 80 millimetre fan with double ball bearings handles cooling duties, designed to maintain airflow during extended workloads without excessive noise. The manufacturer notes this unit can upgrade systems originally equipped with 200, 250, 300, or 350 watt units, and the platform supports an upgrade path to 420 watts if higher capacity is later required.
Verify that your Slimline chassis accepts the TFX form factor and that the existing mounting points align with this replacement unit. Confirm your motherboard uses a 20+4 pin main power connector and a 4-pin CPU power header, as older proprietary layouts will not match. Ensure the three SATA and three Molex connectors meet your current drive count, and check that the 100 to 240 volt input range suits your local mains supply.
| Type | AT |
|---|
The 80 mm fan uses double ball bearings for quiet, reliable airflow; it keeps the 300 W unit cool without excessive noise during continuous operation.
Your motherboard needs a 20+4 pin socket, the CPU a 4-pin connector, and drives require three SATA plus three Molex plugs; a floppy lead is also included.
Yes, it replaces 200 W, 250 W, 300 W or 350 W units and delivers 300 W steady power to the existing motherboard, CPU and drives.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?