Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

myVolts

myVolts 36V 10A 360W AT Power Supply

SKU CH-SKS7-SW3T7

A 36V 10A AT switching supply delivering 360W from 100–240V AC with selectable 110/220V input, overload and over-voltage protection, and a load-controlled cooling fan

  • TypeAT
  • Delivers stable 36 V DC output for reliable equipment operation
  • Universal 100–240 V AC input works worldwide without adapters
  • Selectable 110/220 V switch matches local mains voltage safely
  • Built-in overload, short-circuit and over-voltage protection safeguards connected devices
  • Auto on/off cooling fan runs only when needed for quieter low-load use

36 V 10 A AT power supply

This AT-type switching supply delivers a regulated 36 V output at up to 10 A for 360 W continuous power. It suits industrial automation, LED display systems and similar DC loads that require a fixed 36 V rail.

Universal AC input with voltage selector

A manual 110 V / 220 V switch sets the input range from 100 V to 240 V AC. Built-in short-circuit, overload and over-voltage protection plus an auto on/off cooling fan protect connected equipment and keep temperatures low under varying loads.

Replaces linear or lower-wattage 36 V units

The 360 W capacity upgrades installations that previously used smaller 36 V supplies or noisy linear transformers. The jump is worthwhile when the load demands the full 10 A or when fan-speed noise varies with load and must be accepted.

Privalumai

  • Delivers stable 36 V DC output for reliable equipment operation
  • Universal 100–240 V AC input works worldwide without adapters
  • Selectable 110/220 V switch matches local mains voltage safely
  • Built-in overload, short-circuit and over-voltage protection safeguards connected devices
  • Auto on/off cooling fan runs only when needed for quieter low-load use

Specifikacijos

TypeAT

Klausimai apie šią prekę

Does the AT power supply accept both 110 V and 220 V mains?

Yes, a selector switch on the unit lets you choose 110 V or 220 V AC input before powering on.

What physical mounting does the 360 W unit require?

The supply is an open-frame SMPS designed for chassis mounting; four corner holes accept standard M3 screws.

How is the 36 V output wired and what step is often missed?

Connect the DC output terminals to your load observing polarity, then set the 110/220 V switch to match your mains before applying power.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.