Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular metal AT power supply with fan and voltage selector switch

myVolts

myVolts 36V 10A 360W AT Power Supply

SKU CH-SKS7-SW3T7

A 36V 10A AT switching supply delivering 360W from 100–240V AC with selectable 110/220V input, overload and over-voltage protection, and a load-controlled cooling fan

  • TypeAT
  • Delivers stable 36 V DC output for reliable equipment operation
  • Universal 100–240 V AC input works worldwide without adapters
  • Selectable 110/220 V switch matches local mains voltage safely
  • Built-in overload, short-circuit and over-voltage protection safeguards connected devices
  • Auto on/off cooling fan runs only when needed for quieter low-load use

36 V 10 A AT power supply

This AT-type switching supply delivers a regulated 36 V output at up to 10 A for 360 W continuous power. It suits industrial automation, LED display systems and similar DC loads that require a fixed 36 V rail.

Universal AC input with voltage selector

A manual 110 V / 220 V switch sets the input range from 100 V to 240 V AC. Built-in short-circuit, overload and over-voltage protection plus an auto on/off cooling fan protect connected equipment and keep temperatures low under varying loads.

Replaces linear or lower-wattage 36 V units

The 360 W capacity upgrades installations that previously used smaller 36 V supplies or noisy linear transformers. The jump is worthwhile when the load demands the full 10 A or when fan-speed noise varies with load and must be accepted.

Pluspunten

  • Delivers stable 36 V DC output for reliable equipment operation
  • Universal 100–240 V AC input works worldwide without adapters
  • Selectable 110/220 V switch matches local mains voltage safely
  • Built-in overload, short-circuit and over-voltage protection safeguards connected devices
  • Auto on/off cooling fan runs only when needed for quieter low-load use

Specificaties

TypeAT

Vragen over dit artikel

Does the AT power supply accept both 110 V and 220 V mains?

Yes, a selector switch on the unit lets you choose 110 V or 220 V AC input before powering on.

What physical mounting does the 360 W unit require?

The supply is an open-frame SMPS designed for chassis mounting; four corner holes accept standard M3 screws.

How is the 36 V output wired and what step is often missed?

Connect the DC output terminals to your load observing polarity, then set the 110/220 V switch to match your mains before applying power.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.