Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact ATX power supply tester with LCD screen showing voltage to .01V, 20/24 pin connector and SATA ports

myVolts

myVolts ATX Power Supply Tester LCD ±0.01V

SKU CH-DY9S-4NS40

Tests ATX, BTX, ITX and TFX power supplies with LCD voltage readout to ±0.01 V and audible fault alarm

  • TypeAT
  • LCD shows voltages to ±0.01 V accuracy
  • Buzzer sounds automatically when any reading exceeds limits
  • Tests ATX, BTX, ITX and TFX power supplies
  • Checks 20- and 24-pin connectors plus P4, P6, P8, SATA and IDE leads
  • PG signal monitored and reported on the same display

ATX Power Supply Tester with LCD

The myVolts ATX Power Supply Tester LCD checks ATX, BTX, ITX and TFX power supplies. It connects to the 20-pin or 24-pin main connector and displays each rail voltage with ±0.01V accuracy. A built-in buzzer sounds when any reading falls outside normal limits.

Thermals Noise and Power Draw

The tester draws its operating power directly from the supply under test so no external adapter is needed. It has no fan and produces no audible noise during a check. The LCD remains readable while the unit is powered by the PSU itself.

Bundled Connectors and Alerts

The package includes leads for P4, P6, P8, SATA and IDE outputs. Only the 20-pin and 24-pin connections show voltage on the LCD; the peripheral connectors use LED indicators instead. The buzzer and flashing display give immediate warning of any fault.

Privalumai

  • LCD shows voltages to ±0.01 V accuracy
  • Buzzer sounds automatically when any reading exceeds limits
  • Tests ATX, BTX, ITX and TFX power supplies
  • Checks 20- and 24-pin connectors plus P4, P6, P8, SATA and IDE leads
  • PG signal monitored and reported on the same display

Specifikacijos

TypeAT

Klausimai apie šią prekę

How do I connect the tester to a 24-pin ATX supply and what step is often missed?

Plug the 24-pin cable from the power supply into the tester's matching socket; the unit powers on immediately from the supply itself, so no separate battery or mains lead is required.

What part will need replacement first during long-term use?

The piezo buzzer that sounds the fault alarm is the only moving component and will eventually wear out after repeated audible alerts.

What limit appears first when the tester runs continuously on a loaded supply?

The LCD voltage readout is specified to ±0.01V accuracy; sustained operation does not introduce any additional thermal or timing limit beyond that display precision.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.