Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Compact ATX power supply tester with LCD screen showing voltage to .01V, 20/24 pin connector and SATA ports

myVolts

myVolts ATX Power Supply Tester LCD ±0.01V

SKU CH-DY9S-4NS40

Tests ATX, BTX, ITX and TFX power supplies with LCD voltage readout to ±0.01 V and audible fault alarm

  • TypeAT
  • LCD shows voltages to ±0.01 V accuracy
  • Buzzer sounds automatically when any reading exceeds limits
  • Tests ATX, BTX, ITX and TFX power supplies
  • Checks 20- and 24-pin connectors plus P4, P6, P8, SATA and IDE leads
  • PG signal monitored and reported on the same display

ATX Power Supply Tester with LCD

The myVolts ATX Power Supply Tester LCD checks ATX, BTX, ITX and TFX power supplies. It connects to the 20-pin or 24-pin main connector and displays each rail voltage with ±0.01V accuracy. A built-in buzzer sounds when any reading falls outside normal limits.

Thermals Noise and Power Draw

The tester draws its operating power directly from the supply under test so no external adapter is needed. It has no fan and produces no audible noise during a check. The LCD remains readable while the unit is powered by the PSU itself.

Bundled Connectors and Alerts

The package includes leads for P4, P6, P8, SATA and IDE outputs. Only the 20-pin and 24-pin connections show voltage on the LCD; the peripheral connectors use LED indicators instead. The buzzer and flashing display give immediate warning of any fault.

Fordele

  • LCD shows voltages to ±0.01 V accuracy
  • Buzzer sounds automatically when any reading exceeds limits
  • Tests ATX, BTX, ITX and TFX power supplies
  • Checks 20- and 24-pin connectors plus P4, P6, P8, SATA and IDE leads
  • PG signal monitored and reported on the same display

Specifikationer

TypeAT

Spørgsmål om denne vare

How do I connect the tester to a 24-pin ATX supply and what step is often missed?

Plug the 24-pin cable from the power supply into the tester's matching socket; the unit powers on immediately from the supply itself, so no separate battery or mains lead is required.

What part will need replacement first during long-term use?

The piezo buzzer that sounds the fault alarm is the only moving component and will eventually wear out after repeated audible alerts.

What limit appears first when the tester runs continuously on a loaded supply?

The LCD voltage readout is specified to ±0.01V accuracy; sustained operation does not introduce any additional thermal or timing limit beyond that display precision.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.