Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black rectangular power brick with DC2.1 barrel connector and US plug prongs

myVolts

myVolts Raspberry Pi Build HAT Power Supply 48W 8V 6A DC2.1

SKU CH-1RH4-18ZYY

Powers a Raspberry Pi Build HAT, compatible Pi boards and LEGO Technic devices from a single 48 W, 8 V 6 A supply with a 5.5 mm by 2.1 mm DC plug

  • TypeAT
  • Powers Raspberry Pi Build HAT and LEGO Technic devices from one 48W supply
  • Runs Raspberry Pi computers except Pi 400 without extra power needed
  • Accepts worldwide AC input from 110 to 240V at 50 or 60Hz
  • Delivers stable 8V 6A DC output through 5.5mm OD 2.1mm ID connector
  • Single unit includes everything required to start building immediately

Raspberry Pi Build HAT Power Supply

This 48 W unit powers the Raspberry Pi Build HAT, the Raspberry Pi computer (except Raspberry Pi 400) and connected LEGO Technic devices from a single source. No extra power supply is needed for the attached hardware. It is designed for makers and educators building motorised LEGO projects with the Build HAT ecosystem.

Check input voltage and connector fit

The supply accepts AC 110~240 V at 50/60 Hz and delivers 8 V at 6 A through a DC2.1 plug with a 5.5 mm outer diameter and 2.1 mm inner diameter. Verify that your Build HAT or Pi board uses this exact barrel size before ordering. The package includes a US-style mains plug, so confirm it matches your local socket or have a suitable adapter ready.

Steady 8 V output under continuous motor load

The unit maintains its rated 8 V 6 A output while driving LEGO Technic motors and sensors over extended periods. This avoids the voltage sag that can occur with undersized adapters when multiple actuators run simultaneously. Stable power keeps the Pi and HAT from resetting during long build sessions or classroom demonstrations.

Privalumai

  • Powers Raspberry Pi Build HAT and LEGO Technic devices from one 48W supply
  • Runs Raspberry Pi computers except Pi 400 without extra power needed
  • Accepts worldwide AC input from 110 to 240V at 50 or 60Hz
  • Delivers stable 8V 6A DC output through 5.5mm OD 2.1mm ID connector
  • Single unit includes everything required to start building immediately

Specifikacijos

TypeAT

Klausimai apie šią prekę

Does the box include the Raspberry Pi Build HAT itself or only the 48W 8V 6A power supply with DC2.1 connector?

The package contains only the power supply unit. The Raspberry Pi Build HAT and any LEGO Technic devices must be purchased separately.

Should I choose this 8V 6A model for a standard Raspberry Pi 4 or is it only for the Build HAT?

This supply powers the Build HAT and compatible Raspberry Pi computers except the Raspberry Pi 400. For a standard Pi 4 without the HAT, a 5V USB-C supply is the correct choice.

What does the 48W rating mean when the supply is running a Raspberry Pi and LEGO motors?

The 48W output at 8V 6A provides enough headroom to run the Pi, the Build HAT and multiple LEGO Technic motors simultaneously without needing a second power source.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.