Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-600-12 12V 50A 600W Power Supply

SKU CH-VYWP-PVW2A

A 12 V, 600 W switch-mode supply with overload, overvoltage and short-circuit protection for industrial automation, LED lighting, CCTV and 3D printers

  • TypeAT
  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 to 40 °C with long service life
  • 100 % full-load burn-in test before shipment
  • CCC, FCC and CE safety compliance certified

Industrial 12 V power unit

This 600 W switch-mode supply delivers a regulated 12 V DC output at up to 50 A. It is built for industrial automation, LED displays, CCTV systems, 3D printers and similar equipment that require a stable DC source. The aluminium-alloy enclosure aids heat dissipation without a fan. Protection circuits guard against short circuit, overload and overvoltage conditions.

AC input tolerance and output adjust

The unit accepts a nominal 110 V or 220 V AC input with a ±15 % range, covering typical mains variation worldwide. A built-in adjustment potentiometer lets the installer trim the output voltage around the 12 V nominal level. Operating temperature is rated from 0 to 40 °C with humidity up to 95 % non-condensing.

50 A continuous current rating

The single specification that decides suitability is the 50 A maximum output current at 12 V. Systems drawing more than this will overload the supply, while lighter loads run well within its 600 W capacity. CCC, FCC and CE markings confirm basic safety compliance for the listed applications.

Privalumai

  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 to 40 °C with long service life
  • 100 % full-load burn-in test before shipment
  • CCC, FCC and CE safety compliance certified

Specifikacijos

TypeAT

Klausimai apie šią prekę

Is the S-600-12 the right 12V unit for a 600W load?

Yes — this model delivers 12V at 50A for 600W continuous output, matching the headline rating exactly.

What does the 600W rating mean when the supply is installed in a machine?

It means the unit can sustain 50A at 12V DC continuously, with built-in short-circuit, overload and over-voltage protection and low DC ripple.

What AC input range does the S-600-12 accept, and what does that cap in practice?

The supply accepts AC 110/220V ±15%, so it operates worldwide on standard mains without manual voltage selection.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.