Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular aluminium power supply, silver finish, screw terminals visible

myVolts

myVolts S-600-12 12V 50A 600W Power Supply

SKU CH-VYWP-PVW2A

A 12 V, 600 W switch-mode supply with overload, overvoltage and short-circuit protection for industrial automation, LED lighting, CCTV and 3D printers

  • TypeAT
  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 to 40 °C with long service life
  • 100 % full-load burn-in test before shipment
  • CCC, FCC and CE safety compliance certified

Industrial 12 V power unit

This 600 W switch-mode supply delivers a regulated 12 V DC output at up to 50 A. It is built for industrial automation, LED displays, CCTV systems, 3D printers and similar equipment that require a stable DC source. The aluminium-alloy enclosure aids heat dissipation without a fan. Protection circuits guard against short circuit, overload and overvoltage conditions.

AC input tolerance and output adjust

The unit accepts a nominal 110 V or 220 V AC input with a ±15 % range, covering typical mains variation worldwide. A built-in adjustment potentiometer lets the installer trim the output voltage around the 12 V nominal level. Operating temperature is rated from 0 to 40 °C with humidity up to 95 % non-condensing.

50 A continuous current rating

The single specification that decides suitability is the 50 A maximum output current at 12 V. Systems drawing more than this will overload the supply, while lighter loads run well within its 600 W capacity. CCC, FCC and CE markings confirm basic safety compliance for the listed applications.

Kohokohdat

  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 to 40 °C with long service life
  • 100 % full-load burn-in test before shipment
  • CCC, FCC and CE safety compliance certified

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Is the S-600-12 the right 12V unit for a 600W load?

Yes — this model delivers 12V at 50A for 600W continuous output, matching the headline rating exactly.

What does the 600W rating mean when the supply is installed in a machine?

It means the unit can sustain 50A at 12V DC continuously, with built-in short-circuit, overload and over-voltage protection and low DC ripple.

What AC input range does the S-600-12 accept, and what does that cap in practice?

The supply accepts AC 110/220V ±15%, so it operates worldwide on standard mains without manual voltage selection.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.