Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR5 RDIMM modules in a clear plastic tray

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 6400 CL52 4Rx4 1.1V ECC RDIMM Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-5B10-FT2FH

128 GB DDR5 ECC registered server memory kit with two 64 GB modules running at 6400 MT/s, CL52, 1.1 V, 4Rx4 for Supermicro X14SDW-64CM-SP9F

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Rodyti 4 daugiau konfigūracijų
  • 128 GB total capacity from two 64 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth on supported platforms
  • 4Rx4 registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F memory slots exactly

Exact-Match DDR5-6400 Kit

This 128GB kit contains two 64GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro X14SDW-64CM-SP9F motherboard. The modules run at PC5-51200 with CL52 timing at 1.10V and present a 4Rx4 organisation that matches the board's memory controller expectations.

Suited for full-population server builds

The Registered architecture and ECC make this kit appropriate for production servers that require error correction and stable operation with every slot filled. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC modules, or a different voltage or rank configuration should look elsewhere.

Handles 128GB at rated DDR5-6400 speed

Two 64GB RDIMMs deliver the full 128GB capacity at the board's supported DDR5-6400 data rate with CL52 latency. Capacity is limited to this 2 x 64GB arrangement; larger configurations or higher speeds are not supported by this specific kit.

Privalumai

  • 128 GB total capacity from two 64 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth on supported platforms
  • 4Rx4 registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F memory slots exactly

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

My Supermicro X14SDW-64CM-SP9F board needs 288-pin DDR5 RDIMMs — does this kit match that exact form factor?

Yes, this is a 288-pin DDR5 RDIMM kit built for that motherboard; the registered design and 1.10V voltage match the board's memory-controller requirements.

Will these 4Rx4 modules run at 6400 MT/s alongside any existing DDR5 RDIMMs I keep in the other slots?

The kit is rated DDR5-6400 CL52 at 1.10V; when mixed with other DDR5 RDIMMs the system will negotiate a common speed and timing based on the slowest installed module.

After installation, how can I confirm the full 128 GB is recognised and ECC is active?

Check the BIOS memory map or OS tools such as dmidecode and lsmem; they should show 128 GB total, 6400 MT/s, and ECC status as enabled or corrected errors counting.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.