Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two green DDR5 RDIMM modules in a clear plastic tray

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 6400 CL52 4Rx4 1.1V ECC RDIMM Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-5B10-FT2FH

128 GB DDR5 ECC registered server memory kit with two 64 GB modules running at 6400 MT/s, CL52, 1.1 V, 4Rx4 for Supermicro X14SDW-64CM-SP9F

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Vis 4 flere konfigurasjoner
  • 128 GB total capacity from two 64 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth on supported platforms
  • 4Rx4 registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F memory slots exactly

Exact-Match DDR5-6400 Kit

This 128GB kit contains two 64GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro X14SDW-64CM-SP9F motherboard. The modules run at PC5-51200 with CL52 timing at 1.10V and present a 4Rx4 organisation that matches the board's memory controller expectations.

Suited for full-population server builds

The Registered architecture and ECC make this kit appropriate for production servers that require error correction and stable operation with every slot filled. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC modules, or a different voltage or rank configuration should look elsewhere.

Handles 128GB at rated DDR5-6400 speed

Two 64GB RDIMMs deliver the full 128GB capacity at the board's supported DDR5-6400 data rate with CL52 latency. Capacity is limited to this 2 x 64GB arrangement; larger configurations or higher speeds are not supported by this specific kit.

Høydepunkter

  • 128 GB total capacity from two 64 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth on supported platforms
  • 4Rx4 registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F memory slots exactly

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

My Supermicro X14SDW-64CM-SP9F board needs 288-pin DDR5 RDIMMs — does this kit match that exact form factor?

Yes, this is a 288-pin DDR5 RDIMM kit built for that motherboard; the registered design and 1.10V voltage match the board's memory-controller requirements.

Will these 4Rx4 modules run at 6400 MT/s alongside any existing DDR5 RDIMMs I keep in the other slots?

The kit is rated DDR5-6400 CL52 at 1.10V; when mixed with other DDR5 RDIMMs the system will negotiate a common speed and timing based on the slowest installed module.

After installation, how can I confirm the full 128 GB is recognised and ECC is active?

Check the BIOS memory map or OS tools such as dmidecode and lsmem; they should show 128 GB total, 6400 MT/s, and ECC status as enabled or corrected errors counting.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.