Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR3 SODIMM sticks with black chips, 204-pin, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM Kit POSIFLEX HC-1521IR memory upgrade

SKU CH-581Z-YRHVS

16 GB DDR3 SODIMM kit for POSIFLEX HC-1521IR terminals, two 8 GB modules at 1333 MHz CL9 1.35 V

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR3 1333 PC3-10600 speed matches system specification
  • Low 1.35V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX HC-1521IR slots
  • Rigorously stress-tested modules ensure reliable uptime

POSIFLEX HC-1521IR memory kit

This 16 GB DDR3 SODIMM kit is built for the POSIFLEX HC-1521IR point-of-sale terminal. It contains two 8 GB modules that install directly into the system's 204-pin slots. The upgrade targets operators who need more headroom for simultaneous POS applications.

204-pin unbuffered non-ECC layout

Modules use a standard 204-pin SODIMM edge connector with no heat spreader, keeping the profile low enough for the terminal's tight chassis. The unbuffered, non-ECC design matches the motherboard's memory controller without requiring registered DIMM support. Major-brand DRAM from Samsung, Micron or Hynix is used throughout.

1.35 V low-voltage operation at 1333 MHz

Each module runs at 1.35 V while rated for 1.50 V, reducing power draw and heat inside the sealed enclosure. CL9 latency at DDR3-1333 (PC3-10600) delivers stable throughput for transaction workloads. No active cooling is needed, so the terminal remains silent during extended shifts.

Privalumai

  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR3 1333 PC3-10600 speed matches system specification
  • Low 1.35V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX HC-1521IR slots
  • Rigorously stress-tested modules ensure reliable uptime

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Klausimai apie šią prekę

Does the DDR3 1333 PC3-10600 interface limit the POSIFLEX HC-1521IR to 1333 MHz memory speed?

Yes, the DDR3 1333 PC3-10600 specification caps the memory bus at 1333 MHz for this terminal.

Will the 204-pin SODIMM modules fit the POSIFLEX HC-1521IR memory slots without an adapter?

Yes, the 204-pin DDR3 SODIMM form factor matches the slots used in the HC-1521IR.

Do I need to configure any BIOS settings after installing the 2Rx8 modules, or is it plug-and-play?

Installation is plug-and-play; the system detects the 2Rx8 modules automatically with no BIOS changes required.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.