BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278304BTC
Skladom
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM Kit POSIFLEX HC-1521IR memory upgrade
16 GB DDR3 SODIMM kit for POSIFLEX HC-1521IR terminals, two 8 GB modules at 1333 MHz CL9 1.35 V
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 16GB dual-channel kit boosts POS terminal responsiveness
- DDR3 1333 PC3-10600 speed matches system specification
- Low 1.35V operation reduces power draw and heat
- 204-pin SODIMM form factor fits POSIFLEX HC-1521IR slots
- Rigorously stress-tested modules ensure reliable uptime
POSIFLEX HC-1521IR memory kit
This 16 GB DDR3 SODIMM kit is built for the POSIFLEX HC-1521IR point-of-sale terminal. It contains two 8 GB modules that install directly into the system's 204-pin slots. The upgrade targets operators who need more headroom for simultaneous POS applications.
204-pin unbuffered non-ECC layout
Modules use a standard 204-pin SODIMM edge connector with no heat spreader, keeping the profile low enough for the terminal's tight chassis. The unbuffered, non-ECC design matches the motherboard's memory controller without requiring registered DIMM support. Major-brand DRAM from Samsung, Micron or Hynix is used throughout.
1.35 V low-voltage operation at 1333 MHz
Each module runs at 1.35 V while rated for 1.50 V, reducing power draw and heat inside the sealed enclosure. CL9 latency at DDR3-1333 (PC3-10600) delivers stable throughput for transaction workloads. No active cooling is needed, so the terminal remains silent during extended shifts.
Prednosti
- 16GB dual-channel kit boosts POS terminal responsiveness
- DDR3 1333 PC3-10600 speed matches system specification
- Low 1.35V operation reduces power draw and heat
- 204-pin SODIMM form factor fits POSIFLEX HC-1521IR slots
- Rigorously stress-tested modules ensure reliable uptime
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
Does the DDR3 1333 PC3-10600 interface limit the POSIFLEX HC-1521IR to 1333 MHz memory speed?
Yes, the DDR3 1333 PC3-10600 specification caps the memory bus at 1333 MHz for this terminal.
Will the 204-pin SODIMM modules fit the POSIFLEX HC-1521IR memory slots without an adapter?
Yes, the 204-pin DDR3 SODIMM form factor matches the slots used in the HC-1521IR.
Do I need to configure any BIOS settings after installing the 2Rx8 modules, or is it plug-and-play?
Installation is plug-and-play; the system detects the 2Rx8 modules automatically with no BIOS changes required.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
